Arista hardware health and environmental nagios plugin

Mon May 22 07:10:36 UTC 2017

Hello,

> Wiadomość napisana przez bas <kilobit at gmail.com> w dniu 19.05.2017, o godz. 21:34:
> 
> I had hoped not to have to re-invent the wheel.

Some custom scripts I use on 7050SX: https://github.com/piwanejko/Arista-monitoring-tools
Nagios checks:

CPU1 temperature			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.4.100006001'!'550'!'600'
CPU1 load				check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.25.3.3.1.2.1'!'70'!'90'
CPU2 temperature			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.4.100006002'!'550'!'600'
CPU2 load				check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.25.3.3.1.2.2'!'70'!'90'
CPU3 temperature			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.4.100006003'!'550'!'600'
CPU3 load				check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.25.3.3.1.2.3'!'70'!'90'
CPU4 temperature			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.4.100006004'!'550'!'600'
CPU4 load				check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.25.3.3.1.2.4'!'70'!'90'
Fan tray 1 status			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100601111'!''!'1'	
Fan tray 2 status			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100602111'!''!'1'
Fan tray 3 status			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100603111'!''!'1'
Fan tray 4 status			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100604111'!''!'1'
Lower board temperature	check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.4.100006011'!'500'!'600'
PSU1 fan status			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100711211'!''!'1'
PSU1 in current status		check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100711103'!''!'1'
PSU1 in voltage status		check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100711105'!''!'1'
PSU2 fan status			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100721211'!''!'1'
PSU2 in current status		check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100721103'!''!'1'
PSU2 in voltage status		check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.5.100721105'!''!'1'
SUP temperature			check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.4.100006005'!'550'!'600'
Upper board temperature	check_snmp_sw!2c!'public'!'.1.3.6.1.2.1.99.1.1.1.4.100006009'!'500'!'600'
Uptime					check_snmp_sw!'2c'!'public'!'.1.3.6.1.2.1.1.3.0'!'@60000:70000'!'60000:'

check_snmp_sw	->	check_snmp -H $HOSTADDRESS$ -P $ARG1$ -C $ARG2$ -o $ARG3$ -w $ARG4$ -c $ARG5$

I also made custom script to check discs and memory utilization, but it's too old and terribly written to be shared.

Best regards,