Switch for SFP+

Thu May 14 13:46:21 UTC 2020

Thank you. The problem is that to get a price lower than U$D 3000 I have 
to resort to a used device.

El 14/5/20 a las 01:08, Mehmet Akcin escribió:
> Used Juniper QFX5100-48T will do it. Probably overkill but you can 
> grab one cheap @ebay
>
> On Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini at gmail.com 
> <mailto:mjgasparini at gmail.com>> wrote:
>
>     Good afternoon.
>
>     I'm looking for a switch with the following capabilities:
>     . transport for more than 20 gbps
>     . link aggregation LACP
>     . slots for SFP+
>     . seamlessly when trunking vlans through the link aggregation.
>
>     And essentially that doesn't exceed US$D 2000 and is compatible with
>     10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor
>     itself
>     (e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs).
>
>     If any of you have a good experience with a device that meets these
>     requirements (which are minimal with the exception of price and
>     compatibility) ?
>
>     Regards.
>     Mauro Gasparini
>
> -- 
> Mehmet
> +1-424-298-1903

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200514/471b16c2/attachment.html>