Switch for SFP+
Mehmet Akcin
mehmet at akcin.net
Thu May 14 04:08:23 UTC 2020
Used Juniper QFX5100-48T will do it. Probably overkill but you can grab one
cheap @ebay
On Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini at gmail.com> wrote:
> Good afternoon.
>
> I'm looking for a switch with the following capabilities:
> . transport for more than 20 gbps
> . link aggregation LACP
> . slots for SFP+
> . seamlessly when trunking vlans through the link aggregation.
>
> And essentially that doesn't exceed US$D 2000 and is compatible with
> 10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor itself
> (e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs).
>
> If any of you have a good experience with a device that meets these
> requirements (which are minimal with the exception of price and
> compatibility) ?
>
> Regards.
> Mauro Gasparini
>
--
Mehmet
+1-424-298-1903
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200513/f6dc3e5e/attachment.html>
More information about the NANOG
mailing list