DWDM Mux/Demux using 40G Optics
lguillory at reservetele.com
Mon Jun 19 19:47:29 CST 2017
Gotcha, figured I misread it. Sorry it's Monday.
From: Faisal Imtiaz [mailto:faisal at snappytelecom.net]
Sent: Monday, June 19, 2017 2:45 PM
To: Luke Guillory
Cc: Colton Conor; nanog list
Subject: Re: DWDM Mux/Demux using 40G Optics
Let me try to explain better...
All Single Mode Fiber 40g Optics are using 4 cwdm channels ...
If you use a cwdm mux/demux with and expansion port and it is only mux/de-muxing 1450 to 1610 (i.e. not using the 1270-1330) you can use the expansion port to connect the 40g Optics
If you have a CWDM or DWDM Mux, with a specific 1310 pass thru port (Wide-band etc... check the specs) then you can plug the 40g Optics on to that port and it will pass the 4 channels thru it.
e.g. with the cwdm mux (see picture in previous post) ..you end up with 1x40g (lane) + 8 or 9 10g (cwdm lanes).
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net
----- Original Message -----
> From: "Luke Guillory" <lguillory at reservetele.com>
> To: "Faisal Imtiaz" <faisal at snappytelecom.net>
> Cc: "Colton Conor" <colton.conor at gmail.com>, "nanog list"
> <nanog at nanog.org>
> Sent: Monday, June 19, 2017 3:39:00 PM
> Subject: RE: DWDM Mux/Demux using 40G Optics
> And how would he pass his current 40g through that mux? Unless I'm
> misreading your email which I took as he can use his current setup
> along with a 40g 1310, though I'm thinking you're saying he can use
> 1310 40g with colored up 10gs alongside of it.
> -----Original Message-----
> From: Faisal Imtiaz [mailto:faisal at snappytelecom.net]
> Sent: Monday, June 19, 2017 2:27 PM
> To: Luke Guillory
> Cc: Colton Conor; nanog list
> Subject: Re: DWDM Mux/Demux using 40G Optics
> Bench test of the system, with the muxes...
> sorry for the large pictures :)
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232
> Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net
> ----- Original Message -----
>> From: "Luke Guillory" <lguillory at reservetele.com>
>> To: "Faisal Imtiaz" <faisal at snappytelecom.net>, "Colton Conor"
>> <colton.conor at gmail.com>
>> Cc: "nanog list" <nanog at nanog.org>
>> Sent: Monday, June 19, 2017 3:13:10 PM
>> Subject: RE: DWDM Mux/Demux using 40G Optics
>> How would he inject his current 4x10 40g into the mux which is
>> currently on a single LC cable?
>> Luke Guillory
>> Network Operations Manager
>> Tel: 985.536.1212
>> Fax: 985.536.0300
>> Email: lguillory at reservetele.com
>> Reserve Telecommunications
>> 100 RTC Dr
>> Reserve, LA 70084
>> The information transmitted, including attachments, is intended only
>> for the
>> person(s) or entity to which it is addressed and may contain
>> confidential and/or privileged material which should not disseminate,
>> distribute or be copied. Please notify Luke Guillory immediately by
>> e-mail if you have received this e-mail by mistake and delete this
>> e-mail from your system. E-mail transmission cannot be guaranteed to
>> be secure or error-free as information could be intercepted,
>> corrupted, lost, destroyed, arrive late or incomplete, or contain
>> viruses. Luke Guillory therefore does not accept liability for any
>> errors or omissions in the contents of this message, which arise as a
>> result of e-mail transmission. .
>> -----Original Message-----
>> From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Faisal
>> Sent: Monday, June 19, 2017 2:02 PM
>> To: Colton Conor
>> Cc: nanog list
>> Subject: Re: DWDM Mux/Demux using 40G Optics
>> Answers in-line below.
>> If you look at the CWDM Muxes (8 or 9 channel) you will notice a
>> common configuration of
>> Upgrade Port (expansion port) + 1450 or 1470 to 1610nm
>> in the DWDM muxes you will see them listed as # of Port + 1310 pass thru
> > These are exactly what you are looking for ..... :)
More information about the NANOG