<Help with GSR QOS configuration - COS and IP Precedence>

Michael Ruiz mruiz at telwestservices.com
Thu Sep 24 23:57:55 UTC 2009


I found the issue.  I found that one of the techs had applied the
service-policy against an interface that is on the 6-CT3 line card.
This caused the error I found.  I took out the service policy applied
and applied the tx-cos command and problem fixed. 

 

 

Michael Ruiz  mruiz at telwestservices.com
<mailto::mruiz at telwestservices.com> 

 




More information about the NANOG mailing list