10G MetroE 1-2U Switch

Alain Hebert ahebert at pubnix.net
Fri Apr 21 13:07:49 UTC 2017


     Eeee...  We're still in the mist of a battle royal with 6 QFX 5100 
here =D

     We'll know who wins soon.

-----
Alain Hebert                                ahebert at pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443

On 04/13/17 17:59, Kody Vicknair wrote:
> Have you taken a look at the Juniper QFX series? I use these for video multicast and I'm not 100% sure they have support for all the features you've requested, BUT I do know of a competitor that uses them for cheap 10G VPLS deployment. It might be worth looking into. If you need a Juniper engineer to bounce your questions off of, I know a guy...
>
> I'd start here:
>
> http://www.juniper.net/us/en/products-services/switching/qfx-series/qfx5100/
>
>
>
>
> Kody Vicknair
> Network Engineer
>
> Tel:    985.536.1214
> Fax:    985.536.0300
> Email:  kvicknair at reservetele.com
>
> Reserve Telecommunications
> 100 RTC Dr
> Reserve, LA 70084
>
> _________________________________________________________________________________________________
>
> Disclaimer:
> The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material which should not disseminate, distribute or be copied. Please notify Kody Vicknair immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Kody Vicknair therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. .
>
> -----Original Message-----
> From: NANOG [mailto:nanog-bounces+kvicknair=reservetele.com at nanog.org] On Behalf Of Erik Sundberg
> Sent: Thursday, April 13, 2017 4:37 PM
> To: nanog at nanog.org
> Subject: 10G MetroE 1-2U Switch
>
> Hey Nanog,
>
> Looking for a new metroE Edge switch that has more that 10x 10G ports. I am having a hard time finding anything worthwhile without buying a full blown ASR9K Chassis or another vendor's chassis.
>
> Requirements
> MEF compliant
> 1-2U small foot print
> 10G Ports will be used for ENNI's and UNI Ports Prefer MPLS support for L2VPN's (EoMPLS and VPLS) QOS per Sub interface\vlan on a ENNI Cost effect 10G Ports 100G Not required
>
>
> Looking at the
> ASR920's - Great box for 1G but not enough 10G Ports Only 4
> NCS5001/NCS5501 - New\unproven\probably buggy, Lacking some features & QOS issues :/
> ASR900 - Looks good, but was hoping for a smaller foot print. If I remember right the 8x10G Cards can't go in every slot.
>
> Any other platforms I should be looking at?
>
> Ciena, Brocade, Juniper?
>
>
>
> Thanks in advance!
>
> -Erik
>
> ________________________________
>
> CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you.




More information about the NANOG mailing list