Switch designed for mirroring tap ports

Thu Mar 1 11:03:43 UTC 2012

Take a look at VACLs on the Cat side.  It has a capture feature that is
effectively the same as a local SPAN, but without the 2 session limit. If
you do a lot of RSPAN though, this wouldn't be your complete answer (VACL
captures are local only).  VACLs are a bit more granular in defining what's
captured, if say for example you only wanted traffic destined to TCP/80,
you could configure it that way.

David.

On Thu, Mar 1, 2012 at 5:52 AM, Terry Baranski <
terry.baranski.list at gmail.com> wrote:

> On Mar 1, 2012, at 02:13 AM, apishdadi at gmail.com wrote:
>
> > Hello All,
> >
> > We are looking for a switch or a device that we can use for mirroring
> > tap ports. For example , take a mirror port off of a core router say
> > a 6509, connect it to a port on said device, say port 1. I would like
> > then to be able to mirror port 1 on said device to multiple ports,
> > like port 2 , 3, 4. We have the need to analyze traffic from one port
> > on multiple devices. Seems most switches are limited to mirroring to a
> > max of 1 or 2 ports.
>
> We like Gigamon for this purpose.
>
> -Terry
>
>
>
>