Question on IP address used by anycast DNS cache server
haesu at towardex.com
Mon Oct 11 14:18:20 UTC 2004
On Mon, Oct 11, 2004 at 05:23:19PM +0800, Joe Shen wrote:
> I'm , but I met some questions when reading those
> paper from ISC on F-root anycasting.
> 1. As it's descripted in J.Abley's paper, DNS server
> in anycast group should be configured with a real IP
> on its NIC and one or two service IP on loopback
> interface(s). BIND listen on both real IP and service
> IPs. Any DNS answer packet will be encapsulated with
> source address as service IP. To my understanding,
> this is OK for root servers because they do not invoke
> recursive lookup procedure. But, if the DNS server is
> a member of ISP's DNS Cache server farm, recursive
> lookup packets to other DNS server MUST be
> encapsulated with real IP address.
> Is BIND or other DNS software capable of
> distinguishing between DNS answer back packet and
> recursive lookup packets? or could this be done
> automatically by operating system like Solaris, Linux,
> 2. If we want to design a hierachical DNS service
> system which distribute across multiple private AS of
> an ISP, is there any problem to select service IP
> randomly from unused address pool?
This is not a rocket science. Pick a /29 or /30, inject it at multiple places
with capable dns farms into your IGP, or into your IBGP with similar attribs.
Make sure unicast addresses are also supplied to name servers so that they
can source their recursive lookups from unicast, not anycast.
The difference between anycast and unicast in IPv4 is that anycast is simply
a block of what would be unicast addrs, available via multiple end points using
a routing protocol.
James Jun TowardEX Technologies, Inc.
Technical Lead Network Design, Consulting, IT Outsourcing
james at towardex.com Boston-based Colocation & Bandwidth Services
cell: 1(978)-394-2867 web: http://www.towardex.com , noc: www.twdx.net
More information about the NANOG