<div dir="ltr"><div>I think it's useful to clarify terminology - the starlink antenna unit itself is the CPE.  With my v1 starlink terminal you can plug literally anything into the PoE injector that is a 1500 MTU 1000BaseT DHCP client and it'll get an address and a default route out to the internet. All of the smarts happen in the antenna unit/phased array unit which also has its own fairly capable embedded CPU/RAM and routing capability. <br></div><div><br></div><div>The starlink <i>indoor</i> CPE, the home wifi router itself ,is a very basic thing that looks like something derived from a Taiwan ODM 802.11ac home router OpenWRT reference design with a custom firmware load.Or similar. If you've seen a teardown of one they're very simple.</div><div><br></div><div>With the v2 rectangular terminals it's similar but you need a cable adapter to go from the proprietary starlink cable to indoor unit, and additionally the indoor CPE unit also serves as the PoE injector. <br></div><div><br></div><div>In some other ISP type environments you might be expecting the indoor unit to be the CPE, such as what you'd get with a Comcast DOCSIS3.0 all-in-one modem+coax interface+router+wifi device attached to some coax coming in through a wall.</div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Jan 23, 2023 at 3:36 PM Michael Thomas <<a href="mailto:mike@mtcc.com">mike@mtcc.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br>
On 1/23/23 3:14 PM, Eric Kuhnke wrote:<br>
> The original and traditional high-cost way of how this is done for <br>
> MEO/LEO is exemplified by an o3b terminal, which has two active <br>
> motorized tracking antennas. The antenna presently in use for the <br>
> satellite that is overhead follows it until it's descending towards <br>
> the horizon, while at the same time the second antenna aims itself at <br>
> where the next 'rising' satellite is predicted to appear at the <br>
> opposite horizon, and forms a link to it. Make-before-break. If anyone <br>
> has seen photographs in their marketing material/videos of the Oneweb <br>
> beta test earth stations in Alaska they are operating using the same <br>
> general concept.<br>
><br>
> Oneweb has clearly positioned their market focus for telecoms and ISPs <br>
> and large enterprise end users, because their CPE equipment is <br>
> considerably larger, expensive and more power hungry. The beta test <br>
> sites I've seen installed on top of a telecom equipment shelter occupy <br>
> an area approximately 8 feet long x 4 feet wide including radomes and <br>
> mounting.<br>
><br>
I'm trying to understand this so sorry if this comes off dumb. So does <br>
the base station mediate all handoffs where the CPE is told when/what to <br>
handoff? Or does the CPE have some part in it (other than receiving the <br>
handoff)? Does the CPE accept control traffic (L2?) from any bird? Are <br>
there cases where the CPE needs to de-dup packets due to handoffs?<br>
<br>
This is pretty fascinating stuff.<br>
<br>
Mike<br>
<br>
</blockquote></div>