<div dir="ltr"><div><ISP hat on></div><div>After nearly 30 years of being a cisco shop, I'm working on configuring our first pair of Juniper MX204's to replace our current provider-edge cisco. </div><div><br></div><div>I've worked through enough of the Juniper documentation/books to have a fairly good handle on how to configure these, but I wanted to check with the list to see if there are any Juniper-Specific gotchas I might run into that isn't documented well.  </div><div><br></div><div>I've done a bit of googling and am either finding stuff that is largely Cisco-specific or which is generic - all of which I'm rather familiar with based on my past history.   Is there anything I should worry about which is Juniper-specific?</div><div><br></div><div><div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr">- Forrest</div></div></div></div></div>