<div dir="ltr">On our network(which isn't docsis, granted) we use PPPoE for all static IP addresses, because it allows /32 ip address allocations for all home CPE routers, upstream, the routers handle routing via ospf to change the path of where that /32 public IP goes. It allows "zero touch" moving of a customer from one PoP to another. </div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, May 8, 2020 at 8:34 AM <<a href="mailto:edwin.mallette@gmail.com">edwin.mallette@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">So in most cases I'm aware of, the cable provider did not use RIP directly<br>
to a customer-managed device.  The cable operator would deploy their own<br>
managed device, implement RIP and the appropriate keychains between the<br>
operator-managed premise device and the CMTS.  As for the use cases, RIP was<br>
implemented to address the specific 'recombine' use case where one day (or<br>
evening) cable customer attachments could be moved from one CMTS to another.<br>
Instrumenting that with DHCP or TR69 usually required other teams'<br>
involvement and didn't allow portability.<br>
<br>
With IPv6 you get PD which helps immensely.<br>
<br>
Ed<br>
<br>
-----Original Message-----<br>
From: NANOG <<a href="mailto:nanog-bounces@nanog.org" target="_blank">nanog-bounces@nanog.org</a>> On Behalf Of Javier Gutierrez Guerra<br>
Sent: Friday, May 8, 2020 8:57 AM<br>
To: NANOG list <<a href="mailto:nanog@nanog.org" target="_blank">nanog@nanog.org</a>><br>
Subject: RE: How to manage Static IPs to customers<br>
<br>
That's surprising to me, I have no intentions to do routing with our cable<br>
subscribers, that seems like a headache for both sides Today we have<br>
specific ranges within subnets from where we assign IPs to customers, my<br>
main problem that I'm trying to get around is having to change a customer<br>
static IP if their node gets splitter and I have to mode them to a different<br>
CMTS<br>
<br>
Thanks,<br>
<br>
Javier Gutierrez Guerra<br>
            <br>
<br>
<br>
-----Original Message-----<br>
From: NANOG <<a href="mailto:nanog-bounces@nanog.org" target="_blank">nanog-bounces@nanog.org</a>> On Behalf Of Bryan Fields<br>
Sent: Thursday, May 7, 2020 5:57 PM<br>
To: <a href="mailto:nanog@nanog.org" target="_blank">nanog@nanog.org</a><br>
Subject: Re: How to manage Static IPs to customers<br>
<br>
CAUTION: This email is from an external source. Do not click links or open<br>
attachments unless you recognize the sender and know the content is safe.<br>
<br>
On 5/7/20 5:54 PM, Brandon Jackson via NANOG wrote:<br>
> I have seen (Charter) and heard quite a few run RIP or some other <br>
> routing protocol on the CPE.<br>
<br>
Yep, it's RIP.  They don't support IPv6 on this either.  I've been asking<br>
for<br>
IPv6 since 2006, it's always next year.<br>
<br>
--<br>
Bryan Fields<br>
<br>
727-409-1194 - Voice<br>
<a href="http://bryanfields.net" rel="noreferrer" target="_blank">http://bryanfields.net</a><br>
<br>
</blockquote></div>