<html>
<body>
<br>
I'd recommend avoiding the C7 - ADSL2+ performance on them isn't the
best. Look for something with a Broadcom chipset. Even
an old Calix B6 would be better than C7 - although the B6 gear is getting
old, and reliability is sketchy. The power converter modules on
board seem to go.<br><br>
At 01:51 PM 31/12/2019, Shawn L via NANOG wrote:<br><br>
<blockquote type=cite class=cite cite=""><font face="arial" size=2>That's
a tough one. 48 port dslams with internal splitters are easy.
When you're looking for more density you're almost always looking at
external splitter shelves. Could also look at the calix c7 platform
-- tons around on the used market -- but then again, no
splitters.<br><br>
<br><br>
<br>
-----Original Message-----<br>
From: "Dennis Lundström" <dennis@umnum.ca><br>
Sent: Tuesday, December 31, 2019 12:32pm<br>
To: "Nick Edwards" <nick.z.edwards@gmail.com><br>
Cc: "NANOG" <nanog@nanog.org><br>
Subject: Re: DSLAMs<br><br>
Found this one:<br>
<a href="ftp://ftp2.dlink.com/SUPPORT/End_of_Life_Product_List_091519.pdf">
ftp://ftp2.dlink.com/SUPPORT/End_of_Life_Product_List_091519.pdf</a><br>
Stating EOL 2015-04-14 for HW revision A1.<br>
�Dennis<br><br>
On Tue, Dec 31, 2019 at 10:27 Nick Edwards
<<a href="mailto:nick.z.edwards@gmail.com">nick.z.edwards@gmail.com</a>
> wrote:<br>
</font>
<dl>
<dd>Howdy y'all<br><br>
<dd>Chasing some info, does dlink still sell DAS4672 - 672 port adsl2+
dslams?<br><br>
<dd>after simple IP based units with pppoe pass through.<br>
<dd>We could buy a bunch of planet 48 ports, which we used before, but
we<br>
<dd>hoping someone still puts out high capacity (320 plus port) units
with<br>
<dd>inbuilt pots splitters<br><br>
<dd>thanks<br>
</blockquote>
<x-sigsep><p></x-sigsep>
</dl>-- <br><br>
Clayton Zekelman<br>
Managed Network Systems Inc. (MNSi)<br>
3363 Tecumseh Rd. E<br>
Windsor, Ontario<br>
N8W 1H4<br><br>
tel. 519-985-8410<br>
fax.
519-985-8409<x-tab> </x-tab>
</body>
</html>