<div dir="ltr"><div dir="ltr"><div dir="ltr" class="gmail_attr">On Tue, 13 Aug 2019 at 19:23, Javier J <<a href="mailto:javier@advancedmachines.us">javier@advancedmachines.us</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">I'm working with a client site that has been hit twice, very close by lightening.<div><br></div><div>I did lots of electrical work/upgrades/grounding but now I want to focus on protecting Ethernet connections between core switching/other devices that can't be migrated to fiber optic.</div><div><br></div><div>I was looking for surge protection devices for Ethernet but have never shopped for anything like this before. Was wondering if anyone has deployed a solution?</div><div>They don't have a large presence on site (I have been moving all of their core stuff to AWS) but they still have core networking / connectivity and PoE cameras / APs around the property.</div><div>Since migrating their onsite servers/infra to the cloud, now their connectivity is even more important.</div></div></blockquote></div><div dir="ltr"><br></div><div dir="ltr">The correct answer is use fiber.<div><br></div><div>If you really, really can't then APC make a single port transient arrestor p/n PNET1GB.<div><br></div><div>I've used these in the past for a PoE phone in a wooden gatehouse hut right on the 100M max length with no power for active kit and they seem to work fine. I'm using one at the moment for a PoE access point in my garden shed. Not sure I would bring an inter building link in copper onto an expensive core switch though.</div><div><br></div><div>Don't know of anything in higher density than "one port".</div></div><div><br></div><div>--<br></div></div><div dir="ltr" class="gmail_signature"><div dir="ltr"><div>Rob Pickering, <a href="mailto:rob@pickering.org" target="_blank">rob@pickering.org</a></div></div></div></div>