<div dir="ltr">Thanks for the info on the standards portion.<div><br></div><div>The booster configuration has been setup in a test scenario where the external antenna has been placed outside with line of site to the tower, less than a tenth of a mile away, with the feed cable run down a hallway indoors, the booster connected, and the indoor antenna connected (not in the data center though).</div><div><br></div><div>Test with LTE equipment, ie. cell phones, has brought the signal from barely a single bar of 1x to 4 bars of LTE with good speeds. </div><div><br></div><div>Manager has no issue with equipment purchased and has polled the other tenants in the same data center and they are also OK with it. He has just cited that there is some standard but has not been forthcoming with any documentation. </div><div><br></div><div>I figured if there was such a standard then someone here would probably have run across it at some time.</div><div><br></div><div>I am getting the feeling this is just something he has heard or been told in the past and really doesn't know.</div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Jul 18, 2019 at 9:35 AM Matt Harris <<a href="mailto:matt@netfire.net">matt@netfire.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div dir="ltr">On Thu, Jul 18, 2019 at 8:30 AM Robert Webb <<a href="mailto:rwfireguru@gmail.com" target="_blank">rwfireguru@gmail.com</a>> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">So I have a situation where I am trying to get LTE to an out of band router and there is no signal available in the data center. There was a booster setup purchased and I have a manager telling me that standards, industry and not local, prohibit the installation.<div><br></div><div>He has yet to produce any documented industry standard so I thought I would reach out to see if anyone here has heard of this.</div><div><br></div><div>We fall under NIST controls and I haven't found anything there and have also looked at TIA and not found anything.</div></div></blockquote><div><br></div><div>I've never heard of any industry standard preventing such a thing. There are a few questions this raises though. The first and most obvious being, are you sure that a "booster setup" will actually help? Have you done a site survey to figure out how to actually accomplish what you need to accomplish? The other question is whether perhaps the issue he has is with the specific "booster setup" chosen. Perhaps there's something naughty about it, in particular, that has caused him to not want it in his facility (cheap Chinese radios are known, for example, for polluting the spectrum outside of the frequencies that they are designed to operate within.) Maybe he has other folks doing legit RF stuff in there and doesn't want to risk that pollution? </div><div><br></div></div></div>
</blockquote></div>