<div dir="ltr"><div>Fusion has made a lot more sense since Juniper changed the licensing model from every switch AND the MX to just the MX.</div><div><br></div>We've deployed it in some of our sites. It is very cool from a forwarding plane perspective, but from a control plane standpoint it's very...meh. For example, you can't get SNMP oids for light levels or even read them right from the CLI. You have to log into the satellite switch like you would log into an FPC just to get light levels. That's probably the dumbest thing we've dealt with though. I've also heard you can have them do local L2 forwarding, which can be nice for latency and conserving uplink bandwidth, but we don't do any L2 that way so I wouldn't know the implications. From what we can tell though, it does give you Trio L3 performance and features with a MUCH cheaper port cost which is exactly what we were looking for, the extended reach of the chassis was just a fantastic bonus.<div><br></div><div>We also REALLY like that we can have one pair of MX dists for a whole data center with hundreds of thousands of square feet of raised floor and deploy QFX5100 or EX4300 switches in every pod and haul back over just a few pairs of fiber. Saves a lot of time because all that's required to turn up a new connection is a cross connect in the pod. It also allows us to offer copper ports very far away from the MX device, which would normally require media converters.</div><div><br></div><div>We've wanted to experiment with doing this over dark fiber in the metro as well, but we want to feel out any kinks locally before we add additional failure modes.</div><div><br></div><div>Very interested in hearing about other's experiences with Fusion, good, bad, and ugly.<br><div><div><br></div><div>-Matt</div></div></div></div><br><div class="gmail_quote"><div dir="ltr">On Mon, Dec 17, 2018 at 12:08 PM Mehmet Akcin <<a href="mailto:mehmet@akcin.net">mehmet@akcin.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">Hey there</div><div dir="auto"><br></div><div dir="auto">Any ISP using Juniper Fusion Provider Edge? </div><div dir="auto"><br></div><div dir="auto"><div><a href="https://www.juniper.net/documentation/en_US/junos/information-products/pathway-pages/junos-fusion/junos-fusion.html" target="_blank">https://www.juniper.net/documentation/en_US/junos/information-products/pathway-pages/junos-fusion/junos-fusion.html</a></div><br></div><div dir="auto"><br></div><div dir="auto">I am trying to chat with an engineer besides Juniper engineers to understand how buggy (or not) this is to go on production for a medium size ISP.</div><div dir="auto"><br></div><div dir="auto">Any feedback good/bad appreciated. </div>-- <br><div dir="ltr" class="gmail-m_-3463922157267493963gmail_signature">Mehmet<br>+1-424-298-1903</div>
</blockquote></div>