<div dir="ltr"><br><br><div class="gmail_quote"><div dir="ltr">On Wed, Dec 12, 2018 at 7:16 AM Ross Tajvar <<a href="mailto:ross@tajvar.io">ross@tajvar.io</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">I don't really have any advice to offer here (sorry), but I am curious how setting up a GPON LAN would save money vs just getting cheaper switches...and also what a GPON LAN even looks like. Does every office or classroom have an ONT?</div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="font-family:UICTFontTextStyleBody;font-size:17px" dir="auto"><br></div></blockquote></div></blockquote><div><br></div><div><br></div><div>Hi Ross</div><div><br></div><div>Every room will have a small switch style ONT. These devices can have a small battery for power outages and provide PoE to voice over IP phones. Typically the ONT switch has from 4 to 24 copper ethernet ports.</div><div><br></div><div>The building will have a tree like structure of splitters. For example if there are four floors, you might have a 1:4 splitter at the entrance to the building, then on each floor you could have another 1:4 splitter to four sections and then in each section you might have a 1:8 splitter to provide network to 8 rooms. Of course this could be designed in many different configurations depending on the needs and layout of the building. The maximum combined splits is 128. In my example we had 4*4*8 = 128 splits. If you need more, you will deploy additional OLT ports with new splitter trees.</div><div><br></div><div>As to cheaper I can not say. I am not selling any of this stuff. I can say that the price for a small 4 port ONT switch is about USD 50 to 100. The battery is extra but not very expensive. It is just a small cell phone style battery that plugs directly into the ONT, not a full UPS system.</div><div><br></div><div>It is possible to build this with redundancy. I suspect it is rarely done. The redundancy works in the way, that the 1:8 splitter can be replaced with a 2:8 splitter. This has the same power budget, but you get two input ports to the splitter. Only one can be active at a time. The GPON OLT switch needs to coordinate which of the input ports is used. How that is done is vendor specific. You would build an independent backbone tree for the second input port to the splitter.</div><div><br></div><div>It is possible one should not choose this system over a traditional approach, but the people screaming "rip it out" are out of line IMHO. It would be a huge expense to rewire a building with copper and they already got a working fiber system. Much can be said about GPON but it is actually quite stable and easy to manage.</div><div><br></div><div>Compared to the traditional approach, you will only have one centralized GPON switch to manage. All the small ONT switches are managed through this. Complaints about the interface is vendor specific. Because there is only one centralized switch, it would be fairly cheap to switch vendor. Much cheaper than to rewire with copper in any case.</div><div><br></div><div>Regards,</div><div><br></div><div>Baldur</div><div><br></div><div> </div><div><br></div><div> </div></div></div>