junos config commit question

Sun Feb 13 00:48:42 UTC 2022

You're correct. 

This the lab setup and rstp was set to the default, so I only got the commit check to pass only when I deleted [protocols rstp].

On Fri, Feb 11, 2022, at 8:09 PM, Lyndon Nerenberg (VE7TFX/VE6BBM) wrote:
> Nick Suan via NANOG writes:
>> I was actually interested to see if the EX series would let me do this, and i
>> t turns out that if STP is enabled on any of the switch interfaces, it won't:
>> tevruden at core-02# commit check 
>> [edit protocols rstp]
>>   'interface'
>>     XSTP : Interface ge-0/0/0.0 is not enabled for Ethernet Switching
>> error: configuration check-out failed
>
> Do you have any rstp-specific overrides in your config? E.g. we
> have things like this in some of ours:
>
>   rstp {
>       interface ge-0/0/45 {
>           cost 1000;
>           mode point-to-point;
>       }
>       interface ge-1/0/45 {
>           cost 1000;
>           mode point-to-point;
>       }
>       interface ae4;
>       bpdu-block-on-edge;
>   }
>
> With the interfaces gone I would expect the commit check to fail.
>
> --lyndon