VPN recommendations?

Thu Feb 10 18:44:58 UTC 2022

If you want something gui driven I’d do something like Meraki…you can do
the same with just regular old Cisco routers using DMVPN as well.  It’s a
pretty common use case and well established.

On Thu, Feb 10, 2022 at 1:03 PM William Herrin <bill at herrin.us> wrote:

> Hi folks,
>
> Do you have any recommendations for VPN appliances? Specifically: I need
> to build a site to site VPNs at speeds between 100mpbs and 1 gbit where all
> but one of the sites are behind an IPv4 NAT gateway with dynamic public IP
> addresses.
>
> Normally I'd throw OpenVPN on a couple of Linux boxes and be happy but my
> customer insists on a network appliance. Site to site VPNs using IPSec and
> static IP addresses on the plaintext side are a dime a dozen but traversing
> NAT and dynamic IP addresses (and automatically re-establishing when the
> service goes out and comes back up with different addresses) is a hard
> requirement.
>
> Thanks in advance,
> Bill Herrin
>
>
> --
> William Herrin
> bill at herrin.us
> <https://bill.herrin.us/>
> https://bill.herrin.us/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20220210/43216672/attachment.html>