rack rails

Mon Mar 30 16:35:33 UTC 2020

Not sure to be honest, I see the following though which may work just not sure how thin this one is. I noticed in the DOCs it says not to use if placing directly on top of another device, which you could assume might mean it's too thick.

BTI7801 Chassis Support Bracket Kit (BT8A78SSB3)

https://www.juniper.net/documentation/en_US/release-independent/bti-series/bti7800/topics/concept/concept-c-hwoig-7800-rack-mounting.html

On 3/30/20, 10:13 AM, "Tore Anderson" <tore at fud.no> wrote:

    *External Email: Use Caution*

    * Luke Guillory

    > I've had gear that came with a small rear support shelf that didn't had to the height, RGB Networks BNPs for example. I'm pretty sure we've used these with the BNPs one on top of the other.
    >
    > Page 16 in this PDF shows the shelf.
    >
    > http://www.konturm.ru/catalogy/df/bnp2xr_installation_guide_3.7.1_20160222.pdf

    Interesting, thanks! Such a shelf would do the trick if it is thin enough to fit in the tiny space between two devices mounted in adjacent rack units.

    Do you know if it is possible to buy this kind of shelf from somewhere (without an accompanying device)?

    Tore