understanding IPv6

Etienne-Victor Depasquale edepa at ieee.org
Sun Jun 7 21:09:43 UTC 2020


The proposal seems to be aimed at more than that.

One major problem which this proposal addresses

is assignment of IPv6 subnets to links as transient and unreliable as links
between IoT nodes.

My ***guess*** is that binding an IPv6 subnet to a link that elusive would
be bad for routing.


Etienne



On Sun, Jun 7, 2020 at 9:33 PM Baldur Norddahl <baldur.norddahl at gmail.com>
wrote:

> What I do not understand about this proposal is why we do not just fix
> wireless multicast? For example the AP could unicast multicast frames to
> subscribed STA and combined with MLD snooping we are done. Would be
> backwards compatible too, compared to a whole new protocol which will take
> decades to gain traction.
>
> Regards,
>
> Baldur
>
>
> On Sun, Jun 7, 2020 at 8:59 PM Joel Halpern <jmh at joelhalpern.com> wrote:
>
>> Just to clarify context, at this stage this is just Pascal's interesting
>> idea for how to make ND work better on wireless.  No IETF working group
>> has adopted this.  Various people seem to be interested, but it will be
>> some time before we know if his approach gets traction.
>>
>> The biggest difference between this and earlier changes along this line
>> is that the wireless broadcast problem provides motivation for the
>> change, where earlier efforts were more ~wouldn't it just be simpler
>> if...~
>>
>> Yours,
>> Joel Halpern
>>
>> On 6/7/2020 2:28 PM, Etienne-Victor Depasquale wrote:
>> > What I'm amazed at is the concept of multi-link subnet and the change
>> in
>> > IP model being proposed.
>> >
>> > See, for example, section 4 of
>> > https://tools.ietf.org/html/draft-thubert-6man-ipv6-over-wireless-05
>> >
>> > Has anyone felt the same about the change being proposed? This swept
>> > away 25 years of thinking about IP subnets and IP links for me.
>> >
>> > Etienne
>> >
>> > On Sun, Jun 7, 2020 at 6:03 PM Brandon Martin <lists.nanog at monmotha.net
>> > <mailto:lists.nanog at monmotha.net>> wrote:
>> >
>> >     On 6/7/20 6:01 AM, Denys Fedoryshchenko wrote:
>> >      > There are very interesting and unobvious moments on IPv4 vs IPv6,
>> >     for
>> >      > example related to battery lifetime in embedded electronics. In
>> >     ipv4,
>> >      > many devices are forced to send "keepalives" so that the NAT
>> >     entry does
>> >      > not disappear, with IPv6 it is not required and bidirectional
>> >      > communications possible at any time. And in fact, it has a huge
>> >     impact
>> >      > on the cost and battery life of IoT devices.
>> >      > When I developed some IoT devices for clients, it turned out
>> that if
>> >      > "IPv6-only" is possible, this significantly reduces the cost of
>> the
>> >      > solution and simplify setup.
>> >
>> >     This is difficult to understate.  "People" are continually amazed
>> >     when I
>> >     show them that I can leave TCP sessions up for days at a time (with
>> >     properly configured endpoints) with absolutely zero keepalive
>> traffic
>> >     being exchanged.
>> >
>> >     As amusingly useful as this may be, it pales in comparison to the
>> >     ability to do the same on deeply embedded devices running off small
>> >     primary cell batteries.  I've got an industrial sensor network
>> product
>> >     where the device poll interval is upwards of 10 minutes, and even
>> then
>> >     it only turns on its receiver.  The transmitter only gets lit up
>> about
>> >     once a day for a "yes I'm still here" notification unless it has
>> >     something else to say.
>> >
>> >     In the end, we made it work across IPv4 by inserting an application
>> >     level gateway.  We just couldn't get reliable, transparent IPv6
>> >     full-prefix connectivity from any of the cellular telematics
>> providers
>> >     at the time.  I don't know if this has changed.  For our
>> application,
>> >     this was fine, but for mixed vendor "IoT" devices, it would probably
>> >     not
>> >     work out well.
>> >     --
>> >     Brandon Martin
>> >
>> >
>> >
>> > --
>> > Ing. Etienne-Victor Depasquale
>> > Assistant Lecturer
>> > Department of Communications & Computer Engineering
>> > Faculty of Information & Communication Technology
>> > University of Malta
>> > Web. https://www.um.edu.mt/profile/etiennedepasquale
>>
>>

-- 
Ing. Etienne-Victor Depasquale
Assistant Lecturer
Department of Communications & Computer Engineering
Faculty of Information & Communication Technology
University of Malta
Web. https://www.um.edu.mt/profile/etiennedepasquale
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200607/f067bad0/attachment.html>


More information about the NANOG mailing list