MX204 Rails

Fri Jul 17 22:10:30 UTC 2020

I tried the Juniper EX-4PST-RMK Kit and the holes do not line up with the MX204.

Sent from my mobile device

> On Jul 17, 2020, at 2:52 PM, Travis Garrison <tgarrison at netviscom.com> wrote:
> 
> We have used these (purchased from ebay) as universal rails for different products. Seemed a bit better than a shelf.
> 
> https://www.apc.com/shop/us/en/products/APC-4-Post-Rackmount-Rails/P-SU032A
> 
> Thanks Travis
> 
> -----Original Message-----
> From: NANOG <nanog-bounces+tgarrison=netviscom.com at nanog.org> On Behalf Of Cory Andrews
> Sent: Thursday, July 16, 2020 2:48 PM
> To: nanog at nanog.org
> Subject: Re: MX204 Rails
> 
> Have you tried the Juniper EX-4PST-RMK Rail Kit?  It is listed as compatible with Juniper EX and QFX compatible, but appears to be potentially the same as the slide rail kit that comes with the MX series devices.
> 
> Cory J Andrews
> NetEquity.com
> 793 Center St. #551
> Lewiston, NY 14092
> 877-582-4726 TF/FAX
> 
>> On 7/16/2020 3:37 PM, Simon Lockhart wrote:
>>> On Thu Jul 16, 2020 at 02:27:25PM -0500, Rafael Possamai wrote:
>>> Doesn't the mx204 have rackmount brackets rather than rails?
>> It has ears at the front, and "rails" at the rear.
>> 
>> The MX204 would have come with the rear rails when bought new.
>> 
>> See 
>> https://www.juniper.net/documentation/en_US/release-independent/junos/
>> topics/topic-map/mx204-installing.html
>> 
>> Simon