Hi-Rise Building Fiber Suggestions

Tim Požár pozar at lns.com
Wed Feb 26 04:44:11 UTC 2020


If you are limited on fiber runs, how about using 10Gb BiDi optics to
limit a ring to say two sets of 15 switches.

Tim

On 2/25/20 8:21 PM, Bradley Burch wrote:
> Should consider DWDM or GPON and in those look at passive optical technologies that can benefit the project.
> 
>> On Feb 25, 2020, at 9:33 PM, Norman Jester <nj at jester.mx> wrote:
>>
>> I’m in the process of choosing hardware
>> for a 30 story building. If anyone has experience with this I’d appreciate any tips.
>>
>> There are two fiber pairs running up the building riser. I need to put a POE switch on each floor using this fiber. 
>>
>> The idea is to cut the fiber at each floor and insert a switch and daisy chain the switches together using one pair, and using the other pair as the failover side of the ring going back to the source so if one device fails it doesn’t take the whole string down.
>>
>> The problem here is how many switches can be strung together and I would not try more than 3 to 5. This is not something I typically do (stacking switches). I have fears of STP and/or RSTP issue stacking past Ethernet switch to switch limits (if they still exist??)
>>
>> Is there a device with a similar protocol as the old 3com (now HP IDF) stacking capability via fiber? 
>>
>> I’d like to use something inexpensive as its to power ubiquiti wifi on each floor.  Ideally if you know something I don’t about ubiquiti switches that can do this I’d appreciate knowing.
>>
>> Norman
>>



More information about the NANOG mailing list