Brocade CER MPLS

Wed Nov 13 20:53:48 UTC 2019

All mpls-interfaces are listed and policy is just traffic-eng ospf.

Nick

From: James Cornman <james at atlanticmetro.net>
Sent: Wednesday, November 13, 2019 2:43 PM
To: Fawcett, Nick <nfawcett at corp.mtco.com>
Cc: nanog at nanog.org
Subject: Re: Brocade CER MPLS

Ensure that 'mpls-interface xxx' is on for all of the interfaces, and also ensure that any traffic-engineering options match on both sides.  "show mpls lsp detail" should show some other info that may be helpful here.

On Wed, Nov 13, 2019 at 3:24 PM Fawcett, Nick via NANOG <nanog at nanog.org<mailto:nanog at nanog.org>> wrote:
I have one CER (let’s call him Charlie) that is not able to build an LSP tunnel to another CER.  Shows “Currently found no route. Will schedule for retry”.  Both CER’s can ping and traceroute each other.  When I had the LSP to the destination router (Snoopy) it adds the LSP and shows UP in status field.  Both have the same number of routes in their ospf table.  Charlie has other LSP’s built to other CER’s on the network with productive VLL’s and VPLS’s.  I have removed both lsp’s from both Charlie and Snoopy and re-added them and only one Snoopy’s LSP comes up.  Any ideas?

Nick

--

Checked by SOPHOS http://www.sophos.com

--

James Cornman

Chief Technology Officer
jcornman at atlanticmetro.net<mailto:jcornman at atlanticmetro.net>
212.792.9950 - ext 101

Atlantic Metro Communications

4 Century Drive, Parsippany NJ  07054

Cloud Hosting • Colocation • Network Connectivity • Managed Services

Follow us on Twitter: @atlanticmetro<https://twitter.com/atlanticmetro> • Like us on Facebook<https://www.facebook.com/atlanticmetro>
www.atlanticmetro.net<https://www.atlanticmetro.net/>

--

Checked by SOPHOS http://www.sophos.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20191113/33bafad6/attachment.html>