Cellular backup connections

Mon Jun 24 11:45:41 UTC 2019

I am getting the same for SSH and https traffic. It's strange. Where the
response is something small like:
<html><head></head><body>
Moved to this <a href="https://63.XX.XX.XX:443/auth.asp">location</a>.
</body></html>
It works But when I try to load pages that are any bigger it fails. Like I
said before I assume it's either an issue with the MTU or window szie. I
was just wondering if anyone encountered such an issue before. It's not
easy getting to someone that knows something. When you have some sort of
concrete info the level1 techs tend to pass you along faster.

On Mon, Jun 24, 2019 at 7:41 AM J. Hellenthal <jhellenthal at dataix.net>
wrote:

> Could be wrong on this but direct SSH on the LTE side may possibly be not
> allowed(filtered) and might just be something you could discuss in a ticket
> with Verizon.
>
> --
>  J. Hellenthal
>
> The fact that there's a highway to Hell but only a stairway to Heaven says
> a lot about anticipated traffic volume.
>
> On Jun 24, 2019, at 04:50, Dovid Bender <dovid at telecurve.com> wrote:
>
> All,
>
> I finally got around to putting in a Verizon LTE connection and the ping
> times are pretty good. There is the occasional issue however for the most
> part ping times are < 50 ms. I have another strange issue though. When I
> try to ssh or connect via the endpoints web interface it fails. If I first
> connect via PPTP or SSL VPN then it works. I ruled out it being my IP since
> if I connect direct from the PPTP or SSL VPN box then it fails as well. It
> seems the tunnel does something (perhaps lowering the MTU or fragmenting
> packets) that allows it to work. Any thoughts?
>
> TIA.
>
>
>
>
> On Mon, Feb 4, 2019 at 8:18 AM Dovid Bender <dovid at telecurve.com> wrote:
>
>> Anyone know if Verizon static IP's over LTE have same issue where they
>> bounce the traffic around before it gets back to the NY metro area?
>>
>>
>>
>> On Thu, Jan 3, 2019 at 6:46 PM Dovid Bender <dovid at telecurve.com> wrote:
>>
>>> All,
>>>
>>> Thanks for all of the feedback. I was on site today and noticed two
>>> things.
>>> 1) As someone mentioned it could be for static IP's they have the
>>> traffic going to a specific location. The POP is in NJ there was a min.
>>> latency of 120ms which prob had to do with this.
>>> 2) I was watching the ping times and it looked something like this:
>>> 400ms
>>> 360ms
>>> 330ms
>>> 300ms
>>> 260ms
>>> 210ms
>>> 170ms
>>> 140ms
>>> 120ms
>>> 400ms
>>> 375ms
>>>
>>> It seems to have been coming in "waves". I assume this has to do with
>>> "how cellular work" and the signal. I tried moving it around by putting it
>>> down low on the floor, moving it locations etc. and saw the same thing
>>> every time. I am going to try Verizon next and see how it goes.
>>>
>>>
>>>
>>> On Sat, Dec 29, 2018 at 12:13 PM Mark Milhollan <mlm at pixelgate.net>
>>> wrote:
>>>
>>>> On Fri, 28 Dec 2018, Dovid Bender wrote:
>>>>
>>>> >I finally got around to setting up a cellular backup device in our new
>>>> POP.
>>>>
>>>> >When SSH'ing in remotely the connection seems rather slow.
>>>>
>>>> Perhaps using MOSH can help make the interactive CLI session less
>>>> annoying.
>>>>
>>>> >Verizon they charge $500.00 just to get a public IP and I want to
>>>> avoid
>>>> >that if possible.
>>>>
>>>> You might look into have it call out / maintain a connection back to
>>>> your infrastructure.
>>>>
>>>>
>>>> /mark
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20190624/87674a1b/attachment.html>