Estimated LTE Data Utilization in Failover Scenario

Paul Amaral razor at meganet.net
Wed Jul 31 16:54:26 UTC 2019


In my experience with LTE is that it’s never enough. We have bank branches
with 20Mbs metro lines and on rare occasion when that circuit drops 4G LTE
will provide you with 10mbs at best also note that latency is much higher
which can mess with ipsec/VOIP etc. I don’t think you can pick how much
bandwidth you will get with 4G LTE. From the testing I have done with VZ 4G
I get 10mbs down and 2/3 up with a -65 RSSI. It’s still better to have LTE
for a backup then not to have it. 

I have used cradlepoint and now switched to cisco ISR 1111. I find the
crandlepoint to be not as reliable as the cisco ISR. The cradlepoint will
get extremely hot, go down for no reason and has poor signal compared to the
ISR 1111 with LTE.  I would stay away from the cradlepoint and find a Cisco
LTE solution. 

Again like I said a backup of any kind even if not sufficient in bandwidth
is better than nothing.



Paul

From: NANOG <nanog-bounces at nanog.org> On Behalf Of Shaun Dombrosky
Sent: Tuesday, July 30, 2019 12:06 PM
To: 'nanog at nanog.org' <nanog at nanog.org>
Subject: Estimated LTE Data Utilization in Failover Scenario

Good Morning,

First time NANOG poster, apologies if I breach etiquette.

Does anyone have any first-hand data on how much data a small-medium
business (SMB) can expect to consume in a failover scenario over a 4G/LTE
connection?  Retail, under 50 head count, using PoS, maybe cloud accounting
software, general internet activity, 8 hour time period.  Wonder if anyone
is using a Cradlepoint or SD-WAN solution that could pull a few quick
numbers from a dashboard for me.  I haven’t had much luck in my searches.

Appreciate any info anyone can provide.

Thanks,

Shaun Dombrosky
Data Network Engineer



E: mailto:sdombrosky at blackfoot.com
http://www.blackfoot.com/ 

Stay connected with Blackfoot:

https://www.facebook.com/GoBlackfoot/?utm_source=Outlook&utm_medium=Sig&utm_
name=2017EmpSig&utm_content=Social 
https://www.linkedin.com/company/blackfoot-telecommunications-group/?utm_sou
rce=Outlook&utm_medium=Sig&utm_name=2017EmpSig&utm_content=Social  http://ww
w.twitter.com/GoBlackfoot/?utm_source=Outlook&utm_medium=Sig&utm_name=2017Em
pSig&utm_content=Social  https://www.youtube.com/BlackfootTelecom?utm_source
=Outlook&utm_medium=Sig&utm_name=2017EmpSig&utm_content=Social


This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to which they are
addressed.  If you are not the intended recipient or the person responsible
for delivering the e-mail to the intended recipient, be advised that you
have received this e-mail in error and that any use, dissemination,
forwarding, printing, or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error, please immediately reply to the
sender by email notifying them of the error and delete the original and
reply copies. Thank you.






More information about the NANOG mailing list