Deploying IPv6 XLAT64

JORDI PALET MARTINEZ jordi.palet at consulintel.es
Wed Sep 26 18:19:43 UTC 2018


You can use Jool for both 464XLAT and just NAT64.

I've done a workshop on this at the LACNIC meeting this week. See slides 43 and next ones:

http://www.lacnic.net/innovaportal/file/3139/1/ipv6-only_v11_16-9.pdf

Saludos,
Jordi
 
 

-----Mensaje original-----
De: NANOG <nanog-bounces at nanog.org> en nombre de Matt Hoppes <mattlists at rivervalleyinternet.net>
Fecha: miércoles, 26 de septiembre de 2018, 15:03
Para: North American Network Operators' Group <nanog at nanog.org>
Asunto: Deploying IPv6 XLAT64

    Looking at getting into IPv6 here ourselves... one of the big hold ups 
    has been the dual stacking.
    
    Can anyone recommend a quality, not ridiculously convoluted to setup, 
    XLAT64 translator that we could run in our network to take the IPv6 to 
    an IPv4 address when the remote server doesn't have 6 capability?
    



**********************************************
IPv4 is over
Are you ready for the new Internet ?
http://www.consulintel.es
The IPv6 Company

This electronic message contains information which may be privileged or confidential. The information is intended to be for the exclusive use of the individual(s) named above and further non-explicilty authorized disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited and will be considered a criminal offense. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited, will be considered a criminal offense, so you must reply to the original sender to inform about this communication and delete it.





More information about the NANOG mailing list