Juniper MX - Routed pseudowire using LDP - VPWS or VPLS

Tim Jackson jackson.tim at gmail.com
Sat Mar 17 14:48:43 UTC 2018


You can either attach the end of the l2circuit to an LT interface, or a PS
interface.


https://www.google.com/amp/s/tgregory.org/2016/07/10/pseudowire-headend-termination-pwht-for-juniper-mx/amp/

https://www.juniper.net/documentation/en_US/junos/topics/concept/pseudowire-subscriber-interfaces-overview.html

https://www.juniper.net/documentation/en_US/junos/topics/usage-guidelines/services-configuring-logical-tunnel-interfaces.html



On Sat, Mar 17, 2018, 9:27 AM Ben Bartsch <uwcableguy at gmail.com> wrote:

> When we had Cisco ASR 920/903 and  ASR9k, I could attach a layer 2
> pseudowire endpoint on that device to a layer 3 BDI/BVI.  I'm trying to do
> the same thing on a Juniper MX 480/960 and it does not appear to be
> supported (for LDP at least - MP-BGP might be supported).  We could do
> either VPWS or VPLS on the PE device handoff to the CE (layer 2 only).
> JTAC has somewhat confirmed this is not supported for LDP, but they only do
> break/fix, not new config.  We do not have professional services (we are
> broke).
>
> Any Juniper routerheads out there that have seen this done using LDP
> without having to hairpin on the MX?
>
> Thanks, y'all.
>
> -ben
>



More information about the NANOG mailing list