Comparison of freeware open source switch software?

Raymond Burkholder ray at oneunified.net
Wed Jan 10 05:06:20 UTC 2018


On 01/09/2018 10:46 PM, Andrey Khomyakov wrote:
> My understanding was that when you buy software such as Cumulus Linux, what
> you are actually paying for is the Broadcom license. You can actually go
> and download Cumulus Linux and it's all open source except, you guessed it,
> switchd, which is what takes the info from the linux kernel and programs it
> into the hardware.

I believe that is Cumulus' business model where they ride the 
requirement for the Broadcom license.  So part of the license fee is for 
Broadcom and part is for Cumulus.

Cumulus has used their licensing fees to develop and maintain tooling 
for their ecosystem.  In that process, they have released many of their 
tools to the opensource world.  Things like ifupdown2 and Free Range 
Routing are a result of that model.

> 
> My understanding was that the rest the "open source" OSs operate the same
> way.

Pica8 does something similar.

> 
> Please, correct me if it is at all possible to buy a whitebox switch and
> then load a "no cost OS" on it and it starts switching packets through
> hardware.

The only case in which I know that you can purchase a bare metal switch 
and put a 'no cost OS' such as Linux on is Mellanox.  They are the ones 
who have developed the switchdev module I mentioned in an earlier post. 
There is _no_ requirement for a black box module to interface between 
the software and the hardware.  That whole path down to but not 
including the hardware is opensource.

There is a large carrier who is making use of switchdev:

https://lwn.net/Articles/675826/

>>>> so to clarify I am interested only in bare-metal or whitebox switches
>>>> and freeware, open source software.

There is something else called SAI, which may do something similar to 
switchdev:

http://packetpushers.net/sai-and-switchdev-need-to-succeed/

>>>>
>>>
>>> It's my understanding that there simply is no such thing. Because none of
>>> the HARDWARE has open source code. Sure, anyone can write software to
>>> spirit packets between NICs (linux and *BSD has had that capability for
>>> decades.) But doing that "at scale" with the various manufacturers SoCs
>>> requires vendor specific code to setup and control the chip. The broadcom
>>> "NDK" is just a shim on top of a pre-compiled proprietary SDK blob.

As mentioned above, and in another message, Mellanox is the only one, 
that I know of, for providing a mechanism to drive the hardware (both 
switch and network cards) from the OS, without a pre-compiled 
proprietary SDK blob (black box).

http://www.mellanox.com/related-docs/prod_switch_software/PB_Spectrum_Linux_Switch.pdf

Disclaimer: I not affiliated with Mellanox, only a customer.


-- 
Raymond Burkholder
ray at oneunified.net
https://blog.raymond.burkholder.net

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




More information about the NANOG mailing list