Feedback - SBC Vendors.

Thu Aug 9 14:12:48 UTC 2018

Thanks I will post there as well

________________________________
From: Hiers, David <David.Hiers at cdk.com>
Sent: Thursday, August 9, 2018 10:11:33 AM
To: James Milko; Ryan Finnesey
Cc: nanog at nanog.org
Subject: RE: Feedback - SBC Vendors.

You might want to drop this question on the VoiceOps list:

voiceops at voiceops.org

It runs at a good signal-to-noise ratio, so you'll get some useful responses.

David

-----Original Message-----
From: NANOG [mailto:nanog-bounces+david.hiers=cdk.com at nanog.org] On Behalf Of James Milko
Sent: Thursday, August 09, 2018 7:06 AM
To: Ryan Finnesey <ryan at finnesey.com>
Cc: nanog at nanog.org
Subject: Re: Feedback - SBC Vendors.

 Which Ribbon product are you looking at?  There are quite a few now and they have different code bases/features.

JM

On Wed, Aug 8, 2018 at 7:56 PM, Ryan Finnesey <ryan at finnesey.com> wrote:

> I am going to have to install a series of SBCs for a  voice offering
> connected to Microsoft Teams.  We are going to pass the SIP traffic
> off to a larger number of SIP providers.  I would like  to get some
> feedback from the group on SBC vendors.  I have two options for
> vendors Ribbon or AudioCodes.  I am leaning towards a software based SBC over an appliance.
>
> Would be helpful to get the other members feedback on Ribbon or
> AudioCodes deployments within their networks.
>
> Cheers
> Ryan
>
>

----------------------------------------------------------------------
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.