Unable to assign an IP address to the sub-interface in Huawei S6720

Josivan Barbosa josivan.barbosa01 at gmail.com
Fri May 19 16:09:13 UTC 2017


Hi Carlos

Thank you for the response. It's not working for me:

<CR03-CGE>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.160 (S6720 V200R008C00SPC500)
Copyright (C) 2000-2015 HUAWEI TECH CO., LTD
HUAWEI S6720-30C-EI-24S-AC Routing Switch uptime is 36 weeks, 6 days, 3
hours, 27 minutes

ES5D2S26Q002 0(Master) : uptime is 36 weeks, 6 days, 3 hours, 27 minutes
2048M bytes DDR Memory
446M bytes FLASH
Pcb      Version :  VER.B
Basic  BootROM  Version : 0208.0001 Compiled at Oct 13 2015, 14:15:20
BootLoad  Version : 0208.0001 Compiled at Oct 24 2015, 02:02:20
CPLD   Version : 0107
Software Version : VRP (R) Software, Version 5.160 (V200R008C00SPC500)
CARD1 information
Pcb      Version : ES5D21Q04Q01 VER.A
CPLD   Version : 0104
PWR1 information
Pcb      Version : PWR VER.A
PWR2 information
Pcb      Version : PWR VER.B
FAN1 information
Pcb      Version : NA

<CR03-CGE>system-view
Enter system view, return user view with Ctrl+Z.

[CR03-CGE]interface XGigabitEthernet 0/0/24

[CR03-CGE-XGigabitEthernet0/0/24]port link-type hybrid
Info: This operation may take a few seconds. Please wait for a
moment...done.

[CR03-CGE-XGigabitEthernet0/0/24]undo port hybrid vlan 1
Info: This operation may take a few seconds. Please wait a moment...done.

[CR03-CGE-XGigabitEthernet0/0/24]port hybrid tagged vlan 21
Info: This operation may take a few seconds. Please wait a moment...done.

[CR03-CGE-XGigabitEthernet0/0/24]quit

[CR03-CGE]interface XGigabitEthernet 0/0/24.500

[CR03-CGE-XGigabitEthernet0/0/24.500]dot1q termination vid 500
Info: This operation may take a few seconds. Please wait a moment...

[CR03-CGE-XGigabitEthernet0/0/24.500]ip address 10.50.0.1 255.255.255.252
                                                                  ^
Error: Unrecognized command found at '^' position.


2017-05-19 10:14 GMT-03:00 Carlos Fraga <carlos.fraga at adamo.es>:

> Hi Josivan,
>
> It works for me (Huawei S6700):
>
> dis Ver --->
>
> Huawei Versatile Routing Platform Software
> VRP (R) software, Version 5.150 (S6700 V200R005C00SPC500)
> Copyright (C) 2000-2015 HUAWEI TECH CO., LTD
> *Quidway S6700-24-EI *Routing Switch uptime is 66 weeks, 1 day, 9 hours,
> 52 minutes
>
> LS61S24N 0(Master) : uptime is 66 weeks, 1 day, 9 hours, 51 minutes
> 512M bytes DDR Memory
> 64M bytes FLASH
> Pcb      Version :  VER.B
> Basic  BOOTROM  Version :  186 Compiled at Jul  2 2015, 17:00:04
> CPLD   Version : 261
> Software Version : VRP (R) Software, Version 5.150 (V200R005C00SPC500)
> FANCARD I information
> Pcb      Version : FAN VER.B
> PWRCARD I information
> Pcb      Version : PWR VER.C
> PWRCARD II information
> Pcb      Version : PWR VER.C
> FANCARD II information
> Pcb      Version : FAN VER.B
>
>
> Here is my config:
>
> interface XGigabitEthernet0/0/16
>  port link-type hybrid
>  undo port hybrid vlan 1
>  port hybrid tagged vlan 2200
>
> #
> interface XGigabitEthernet0/0/16.2235
>
> (x.2235 is the client vlan)
>
>
> I hope this helps you.
>
> Best Regards,
>
> *_____________________________*
>
> *Carlos Fraga*
>
>
> 2017-05-18 23:14 GMT+02:00 Josivan Barbosa <josivan.barbosa01 at gmail.com>:
>
>> Hello,
>>
>> I follow the steps  described in "8.6 Configuring a Dot1q Termination
>> Sub-interface to Implement Inter-VLAN Communication" avaliable in
>> http://support.huawei.com/enterprise/br/doc/DOC1000112303
>> <https://mailtrack.io/trace/link/fc674e3e7101d647339cadd84aff9e2b6ddb7e43?url=http%3A%2F%2Fsupport.huawei.com%2Fenterprise%2Fbr%2Fdoc%2FDOC1000112303&userId=948086&signature=3e5c67b5b519b75e>
>> <https://mailtrack.io/trace/link/70d174e54248db9b79a7f362531
>> 20ebde91d879e?url=http%3A%2F%2Fsupport.huawei.com%2Fenterpri
>> se%2Fbr%2Fdoc%2FDOC1000112303&userId=948086&signature=7608d90d5dd77e0c
>> <https://mailtrack.io/trace/link/8ce339a3a7a27b490840146bd8505113dabd1635?url=http%3A%2F%2Fsupport.huawei.com%2Fenterprise%2Fbr%2Fdoc%2FDOC1000112303&userId=948086&signature=8679ddf28c76dcab>
>> >
>> but dont work. Says  "Error: Unrecognized command found at '^' position"
>> in
>> ip address command.
>>
>> Has anyone managed to configure sub-interface on the Huawei S6720 switch?
>>
>>
>> --
>> Att
>>
>> Josivan Barbosa
>>
>
>


-- 
Att

Josivan Barbosa


More information about the NANOG mailing list