DWDM Mux/Demux using 40G Optics

Mon Jun 19 19:26:52 UTC 2017

Bench test of the system, with the muxes... 

sorry for the large pictures :)

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net

----- Original Message -----
> From: "Luke Guillory" <lguillory at reservetele.com>
> To: "Faisal Imtiaz" <faisal at snappytelecom.net>, "Colton Conor" <colton.conor at gmail.com>
> Cc: "nanog list" <nanog at nanog.org>
> Sent: Monday, June 19, 2017 3:13:10 PM
> Subject: RE: DWDM Mux/Demux using 40G Optics

> Faisal,
> 
> How would he inject his current 4x10 40g into the mux which is currently on a
> single LC cable?
> 
> 
> 
> 
> 
> Luke Guillory
> Network Operations Manager
> 
> Tel:    985.536.1212
> Fax:    985.536.0300
> Email:  lguillory at reservetele.com
> 
> Reserve Telecommunications
> 100 RTC Dr
> Reserve, LA 70084
> 
> _________________________________________________________________________________________________
> 
> Disclaimer:
> The information transmitted, including attachments, is intended only for the
> person(s) or entity to which it is addressed and may contain confidential
> and/or privileged material which should not disseminate, distribute or be
> copied. Please notify Luke Guillory immediately by e-mail if you have received
> this e-mail by mistake and delete this e-mail from your system. E-mail
> transmission cannot be guaranteed to be secure or error-free as information
> could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or
> contain viruses. Luke Guillory therefore does not accept liability for any
> errors or omissions in the contents of this message, which arise as a result of
> e-mail transmission. .
> 
> -----Original Message-----
> From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Faisal Imtiaz
> Sent: Monday, June 19, 2017 2:02 PM
> To: Colton Conor
> Cc: nanog list
> Subject: Re: DWDM Mux/Demux using 40G Optics
> 
> Answers in-line below.
> 
> 
> 
> If you  look at the CWDM Muxes (8 or 9 channel) you will notice a common
> configuration of
> 
>    Upgrade Port (expansion port)  + 1450 or 1470 to 1610nm
> 
>    in the DWDM muxes you will see  them listed as # of Port + 1310 pass thru
>    channel.
> 
> These are exactly what you are looking for ..... :)