DWDM Mux/Demux using 40G Optics

Luke Guillory lguillory at reservetele.com
Mon Jun 19 19:50:48 CST 2017


Pics came in on my side, that's when I figured you were saying 1 40g plus 10s. 



-----Original Message-----
From: Faisal Imtiaz [mailto:faisal at snappytelecom.net] 
Sent: Monday, June 19, 2017 2:50 PM
To: Luke Guillory
Cc: Colton Conor; nanog list
Subject: Re: DWDM Mux/Demux using 40G Optics

I tried to send some pictures, but looks like the message got stuck for moderator.

Here is a link to pictures  what Colton is trying to accomplish.... (my bench test :) )

https://1drv.ms/a/s!Ar2zoQlxIvI1gdV9tYj96YUDWElu6w

Regards.

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net

----- Original Message -----
> From: "Luke Guillory" <lguillory at reservetele.com>
> To: "Faisal Imtiaz" <faisal at snappytelecom.net>
> Cc: "Colton Conor" <colton.conor at gmail.com>, "nanog list" 
> <nanog at nanog.org>
> Sent: Monday, June 19, 2017 3:47:29 PM
> Subject: RE: DWDM Mux/Demux using 40G Optics

> Gotcha, figured I misread it. Sorry it's Monday.
> 
> 
> 
> -----Original Message-----
> From: Faisal Imtiaz [mailto:faisal at snappytelecom.net]
> Sent: Monday, June 19, 2017 2:45 PM
> To: Luke Guillory
> Cc: Colton Conor; nanog list
> Subject: Re: DWDM Mux/Demux using 40G Optics
> 
> Let me try to explain better...
> 
> All Single Mode Fiber 40g Optics are using 4 cwdm channels ...
> 
> If you use a cwdm mux/demux with and expansion port and it is only 
> mux/de-muxing
> 1450 to 1610  (i.e. not using the 1270-1330) you can use the expansion 
> port to connect the 40g Optics
> 
> If you have a CWDM or DWDM Mux, with a specific 1310 pass thru port 
> (Wide-band etc... check the specs) then you can plug the 40g Optics on 
> to that port and it will pass the 4 channels thru it.
> 
> e.g. with the cwdm mux (see picture in previous post) ..you end up 
> with  1x40g
> (lane) + 8 or 9 10g (cwdm lanes).
> 
> 
> 
> Regards.
> 
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232
> 
> Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net
> 
> ----- Original Message -----
>> From: "Luke Guillory" <lguillory at reservetele.com>
>> To: "Faisal Imtiaz" <faisal at snappytelecom.net>
>> Cc: "Colton Conor" <colton.conor at gmail.com>, "nanog list"
>> <nanog at nanog.org>
>> Sent: Monday, June 19, 2017 3:39:00 PM
>> Subject: RE: DWDM Mux/Demux using 40G Optics
> 
>> And how would he pass his current 40g through that mux? Unless I'm 
>> misreading your email which I took as he can use his current setup 
>> along with a 40g 1310, though I'm thinking you're saying he can use
>> 1310 40g with colored up 10gs alongside of it.
>> 
>> 
>> 
>> -----Original Message-----
>> From: Faisal Imtiaz [mailto:faisal at snappytelecom.net]
>> Sent: Monday, June 19, 2017 2:27 PM
>> To: Luke Guillory
>> Cc: Colton Conor; nanog list
>> Subject: Re: DWDM Mux/Demux using 40G Optics
>> 
>> Bench test of the system, with the muxes...
>> 
>> sorry for the large pictures :)
>> 
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> Miami, FL 33155
>> Tel: 305 663 5518 x 232
>> 
>> Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net
>> 
>> ----- Original Message -----
>>> From: "Luke Guillory" <lguillory at reservetele.com>
>>> To: "Faisal Imtiaz" <faisal at snappytelecom.net>, "Colton Conor"
>>> <colton.conor at gmail.com>
>>> Cc: "nanog list" <nanog at nanog.org>
>>> Sent: Monday, June 19, 2017 3:13:10 PM
>>> Subject: RE: DWDM Mux/Demux using 40G Optics
>> 
>>> Faisal,
>>> 
>>> How would he inject his current 4x10 40g into the mux which is 
>>> currently on a single LC cable?
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Luke Guillory
>>> Network Operations Manager
>>> 
>>> Tel:    985.536.1212
>>> Fax:    985.536.0300
>>> Email:  lguillory at reservetele.com
>>> 
>>> Reserve Telecommunications
>>> 100 RTC Dr
>>> Reserve, LA 70084
>>> 
>>> ____________________________________________________________________
>>> _
>>> _
>>> ___________________________
>>> 
>>> Disclaimer:
>>> The information transmitted, including attachments, is intended only 
>>> for the
>>> person(s) or entity to which it is addressed and may contain 
>>> confidential and/or privileged material which should not 
>>> disseminate, distribute or be copied. Please notify Luke Guillory 
>>> immediately by e-mail if you have received this e-mail by mistake 
>>> and delete this e-mail from your system. E-mail transmission cannot 
>>> be guaranteed to be secure or error-free as information could be 
>>> intercepted, corrupted, lost, destroyed, arrive late or incomplete, 
>>> or contain viruses. Luke Guillory therefore does not accept 
>>> liability for any errors or omissions in the contents of this 
>>> message, which arise as a result of e-mail transmission. .
>>> 
>>> -----Original Message-----
>>> From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Faisal 
>>> Imtiaz
>>> Sent: Monday, June 19, 2017 2:02 PM
>>> To: Colton Conor
>>> Cc: nanog list
>>> Subject: Re: DWDM Mux/Demux using 40G Optics
>>> 
>>> Answers in-line below.
>>> 
>>> 
>>> 
>>> If you  look at the CWDM Muxes (8 or 9 channel) you will notice a 
>>> common configuration of
>>> 
>>>    Upgrade Port (expansion port)  + 1450 or 1470 to 1610nm
>>> 
>>>    in the DWDM muxes you will see  them listed as # of Port + 1310 pass thru
>>>    channel.
>>> 
> > > These are exactly what you are looking for ..... :)


More information about the NANOG mailing list