DWDM Mux/Demux using 40G Optics
Mike Hammett
nanog at ics-il.net
Mon Jun 19 19:18:00 UTC 2017
Verify pass-through frequencies for the 1310 (or equivalent) for the passive mux in question. This would only work for a single channel.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Midwest-IX
http://www.midwest-ix.com
----- Original Message -----
From: "Luke Guillory" <lguillory at reservetele.com>
To: "Faisal Imtiaz" <faisal at snappytelecom.net>, "Colton Conor" <colton.conor at gmail.com>
Cc: "nanog list" <nanog at nanog.org>
Sent: Monday, June 19, 2017 2:13:10 PM
Subject: RE: DWDM Mux/Demux using 40G Optics
Faisal,
How would he inject his current 4x10 40g into the mux which is currently on a single LC cable?
Luke Guillory
Network Operations Manager
Tel: 985.536.1212
Fax: 985.536.0300
Email: lguillory at reservetele.com
Reserve Telecommunications
100 RTC Dr
Reserve, LA 70084
_________________________________________________________________________________________________
Disclaimer:
The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material which should not disseminate, distribute or be copied. Please notify Luke Guillory immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Luke Guillory therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. .
-----Original Message-----
From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Faisal Imtiaz
Sent: Monday, June 19, 2017 2:02 PM
To: Colton Conor
Cc: nanog list
Subject: Re: DWDM Mux/Demux using 40G Optics
Answers in-line below.
If you look at the CWDM Muxes (8 or 9 channel) you will notice a common configuration of
Upgrade Port (expansion port) + 1450 or 1470 to 1610nm
in the DWDM muxes you will see them listed as # of Port + 1310 pass thru channel.
These are exactly what you are looking for ..... :)
More information about the NANOG
mailing list