10G MetroE 1-2U Switch

Thu Jul 13 17:57:03 UTC 2017

Hi Erik, as a follow-up to this email from back in April...previously I
hadn't yet tested any qos things on the ACX5048.  Now I have tested some
policing and seems to be working thus far in the lab.  I am policing at the
unit (subinterface) level to I can accomplish per-vlan/per-unit policers.

I have 5 policers like this.... 

{master:0}
agould at eng-lab-5048-2> show configuration firewall | display set | grep
policer

set firewall policer test-policer-1000 if-exceeding bandwidth-limit 100k
set firewall policer test-policer-1000 if-exceeding burst-size-limit 3125
set firewall policer test-policer-1000 then discard

set firewall policer test-policer-1001 if-exceeding bandwidth-limit 100k
set firewall policer test-policer-1001 if-exceeding burst-size-limit 3125
set firewall policer test-policer-1001 then discard

set firewall policer test-policer-1002 if-exceeding bandwidth-limit 100k
set firewall policer test-policer-1002 if-exceeding burst-size-limit 3125
set firewall policer test-policer-1002 then discard

set firewall policer test-policer-1003 if-exceeding bandwidth-limit 100k
set firewall policer test-policer-1003 if-exceeding burst-size-limit 3125
set firewall policer test-policer-1003 then discard

set firewall policer test-policer-1004 if-exceeding bandwidth-limit 100k
set firewall policer test-policer-1004 if-exceeding burst-size-limit 3125
set firewall policer test-policer-1004 then discard

{master:0}
agould at eng-lab-5048-2> show configuration interfaces ge-0/0/19 | display set
set interfaces ge-0/0/19 flexible-vlan-tagging
set interfaces ge-0/0/19 mtu 9216
set interfaces ge-0/0/19 encapsulation flexible-ethernet-services

set interfaces ge-0/0/19 unit 1000 description "TEST att mtso - tower 98
Drain 1 - vlan 1000"
set interfaces ge-0/0/19 unit 1000 encapsulation vlan-vpls
set interfaces ge-0/0/19 unit 1000 vlan-id 1000
set interfaces ge-0/0/19 unit 1000 input-vlan-map pop
set interfaces ge-0/0/19 unit 1000 output-vlan-map push
set interfaces ge-0/0/19 unit 1000 statistics
set interfaces ge-0/0/19 unit 1000 family vpls policer input
test-policer-1000

set interfaces ge-0/0/19 unit 1001 description "TEST att mtso - tower 99
Drain 1 - vlan 1001"
set interfaces ge-0/0/19 unit 1001 encapsulation vlan-vpls
set interfaces ge-0/0/19 unit 1001 vlan-id 1001
set interfaces ge-0/0/19 unit 1001 input-vlan-map pop
set interfaces ge-0/0/19 unit 1001 output-vlan-map push
set interfaces ge-0/0/19 unit 1001 statistics
set interfaces ge-0/0/19 unit 1001 family vpls policer input
test-policer-1001

set interfaces ge-0/0/19 unit 1002 description "TEST att mtso - tower 100
Drain 1 - vlan 1002"
set interfaces ge-0/0/19 unit 1002 encapsulation vlan-vpls
set interfaces ge-0/0/19 unit 1002 vlan-id 1002
set interfaces ge-0/0/19 unit 1002 input-vlan-map pop
set interfaces ge-0/0/19 unit 1002 output-vlan-map push
set interfaces ge-0/0/19 unit 1002 statistics
set interfaces ge-0/0/19 unit 1002 family vpls policer input
test-policer-1002

set interfaces ge-0/0/19 unit 1003 description "TEST att mtso - tower 101
Drain 1 - vlan 1003"
set interfaces ge-0/0/19 unit 1003 encapsulation vlan-vpls
set interfaces ge-0/0/19 unit 1003 vlan-id 1003
set interfaces ge-0/0/19 unit 1003 input-vlan-map pop
set interfaces ge-0/0/19 unit 1003 output-vlan-map push
set interfaces ge-0/0/19 unit 1003 statistics
set interfaces ge-0/0/19 unit 1003 family vpls policer input
test-policer-1003

set interfaces ge-0/0/19 unit 1004 description "TEST att mtso - tower 102
Drain 1 - vlan 1004"
set interfaces ge-0/0/19 unit 1004 encapsulation vlan-vpls
set interfaces ge-0/0/19 unit 1004 vlan-id 1004
set interfaces ge-0/0/19 unit 1004 input-vlan-map pop
set interfaces ge-0/0/19 unit 1004 output-vlan-map push
set interfaces ge-0/0/19 unit 1004 statistics
set interfaces ge-0/0/19 unit 1004 family vpls policer input
test-policer-1004

-----Original Message-----
From: Erik Sundberg [mailto:ESundberg at nitelusa.com] 
Sent: Friday, April 14, 2017 10:30 AM
To: Aaron Gould <aaron1 at gvtc.com>; nanog at nanog.org
Subject: RE: 10G MetroE 1-2U Switch 

Aaron,

Do you know if the ACS5048 has any QOS limitations on this platform?

Is each EVC on a ENNI able to have a separate QOS policy or is it port
based? Just wondering how it would compare to the Cisco NCS5001\NCS5501

Thanks

Erik

Erik Sundberg
Sr. Network Engineering
Network Engineering Department
p: 773.661.5532
c: 708.710.7419
e: esundberg at nitelusa.com
Main: 888.450.2100
NOC 24/7: 866.892.0915
350 North Orleans Street, Suite 1300N Chicago, IL 60654 www.nitelusa.com

Managed Telecom Services
MPLS | Ethernet | Private Line | Internet | Voice | Security