10G MetroE 1-2U Switch
ESundberg at nitelusa.com
Fri Apr 14 15:30:01 UTC 2017
Do you know if the ACS5048 has any QOS limitations on this platform?
Is each EVC on a ENNI able to have a separate QOS policy or is it port based? Just wondering how it would compare to the Cisco NCS5001\NCS5501
Sr. Network Engineering
Network Engineering Department
e: esundberg at nitelusa.com
NOC 24/7: 866.892.0915
350 North Orleans Street, Suite 1300N Chicago, IL 60654
Managed Telecom Services
MPLS | Ethernet | Private Line | Internet | Voice | Security
From: Aaron Gould [mailto:aaron1 at gvtc.com]
Sent: Friday, April 14, 2017 7:40 AM
To: Erik Sundberg; nanog at nanog.org
Subject: RE: 10G MetroE 1-2U Switch
Yw Erik, also, since I'm fond/familiar with my newly deployed Juniper ACX5048's.... here's the MEF info...it's on there.
CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you.
More information about the NANOG