Favorite GPON Vendor?

Art Plato aplato at coldwater.org
Mon Nov 9 19:38:38 UTC 2015


Brian,
How complex is the troubleshooting side of the Adtran? We Use the Enablence Wave7 and getting any useful information from the CPE via the CLI is like pulling hens teeth. I have yet to see a way to view the actual throughput on the ethernet interfaces, only total bits passed, or the light levels at the CPE fiber interface. A bit annoying actually. It means a truck roll to get light levels at the CPE.

Art.

----- Original Message -----
From: "Brian R" <briansupport at hotmail.com>
To: "Eric Rogers" <ecrogers at precisionds.com>, "Jay Patel" <clecny at gmail.com>
Cc: nanog at nanog.org
Sent: Monday, November 9, 2015 2:25:44 PM
Subject: Re: Favorite GPON Vendor?

We use the Adtran ONT solutions.  We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran.  We are providing IP and Analog this way.  If used in the specified scope only there have been very little problems.  Adtran is constantly updating their firmware, this can be a positive and negative at times.  LoL

The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise.
For power we are using the Cyber Power CSN27U12v-NA3 units.
The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1)
All of these part numbers should be available on Adtrans website to look up.

We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them.

Brian

PS I will post this in voiceops as well (it may be more relevant there)

________________________________________
From: NANOG <nanog-bounces at nanog.org> on behalf of Eric Rogers <ecrogers at precisionds.com>
Sent: Monday, November 9, 2015 10:09 AM
To: Jay Patel; nanog at nanog.org
Subject: RE: Favorite GPON Vendor?

I Personally would like to know as well.  We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable.

Eric Rogers
PDS Connect
www.pdsconnect.me
(317) 831-3000 x200


-----Original Message-----
From: NANOG [mailto:nanog-bounces at nanog.org] On Behalf Of Jay Patel
Sent: Monday, November 9, 2015 9:50 AM
To: nanog at nanog.org
Subject: Favorite GPON Vendor?

Who is your favorite GPON  OLT/ONU Vendor? Why?   I am looking for
recommendations

I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list).

Regards,
Jay.



More information about the NANOG mailing list