10Gb CPE

Wolff, Nicholas (Nick) nwolff at oar.net
Fri May 29 14:48:37 UTC 2015


We have around 1000 or so ex3300¹s deployed as cpe gear for sites with
circuits anywhere from 5m to 10g. It both will do everything you need and
allow the flexibility for lots of options if necessary. Not saying it¹s
the best option for everyone but should fit all requirements.



‹ Nick

On 5/28/15, 9:22 AM, "Colton Conor" <colton.conor at gmail.com> wrote:

>Aren't these Brocade and Juniper solutions just switches? I thought the
>original poster was asking for a 10G CPE device?
>
>On Wed, May 27, 2015 at 2:12 PM, Cody Grosskopf <codygrosskopf at gmail.com>
>wrote:
>
>> I also used brocade icx series for this. Depending on feature
>>requirements
>> the juniper ex3300 might be cheaper.
>>
>> On Tue, May 26, 2015, 12:04 PM Chris Lane <clane1875 at gmail.com> wrote:
>>
>> > We use Brocade ICX 6450s for this.
>> >
>> > -Chris
>> >
>> > On Tue, May 26, 2015 at 2:40 PM, Daniel Rohan <drohan at gmail.com>
>>wrote:
>> >
>> > > With the deluge of 10Gb X device recommendations, I thought I'd hit
>>the
>> > > list with one more.  Does anyone out there running 10Gb managed CPE
>> feel
>> > > like sharing their experiences?
>> > >
>> > >  Our use case would be a managed endpoint that would allow for
>>testing
>> > and
>> > > circuit verification while providing a layer 2 extension to our edge
>> gear
>> > > at the PoPs.
>> > >
>> > > We're hoping to find a cheap vendor-supplied solution- not homebrew.
>> > >
>> > > If so, which features have been important to you?
>> > >
>> > > Which vendors have good products?
>> > >
>> > > What price point?
>> > >
>> > >
>> > > Thanks,
>> > >
>> > > Dan
>> > >
>> >
>> >
>> >
>> > --
>> > - Chris
>> >
>>




More information about the NANOG mailing list