AT&T U-Verse Data Setup Convention

Ca By cb.list6 at gmail.com
Thu Jul 30 16:14:04 UTC 2015


On Thu, Jul 30, 2015 at 9:02 AM, Keith Stokes <keiths at neilltech.com> wrote:

> I’m wondering if some can share their experiences or maybe there’s an AT&T
> person here who can confirm policy.
>
> I work for SaaS provider who requires a source IP to access our system to
> businesses.
>
>
That is probably a problematic practice.


> Normally we tell the customer to request a “Static IP” from their
> provider. That term makes sense to most ISPs.
>
> However, we’ve recently worked with an AT&T higher-up tech who told us
> that every U-Verse modem is locked to an address even when set to DHCP and
> will not change unless the unit is changed. Ordering a “Static IP” from
> them means your devices will individually get public addresses, which isn’t
> a requirement for us, isn’t quite as easy to add multiple devices and costs
> our customers more money.
>
> Here are my questions:
>
> 1. Is it really accurate that the customer’s address is tied to the
> modem/router?
>
> 2. For my curiosity, is this done through a DHCP reservation or is there a
> hard coded entry somewhere?
>
> 3. Do all U-Verse modem/routers behave the same way? This particular unit
> was a Motorola but the friends I’ve seen with U-Verse use a Cisco unit.
>
> ---
>
> Keith Stokes
>
>
>
AT&T addressing has been detailed here in some ways.

I am not sure how accurate it is or at what state this has been deployed

http://www.networkworld.com/article/2188898/lan-wan/at-t-demands-we-change-our-networks.html

But, it is possible that AT&T does not have IPv4 static addresses to assign.



More information about the NANOG mailing list