AT&T uVerse blocking SIP?

[Jared Mauch]

Yes.  If you move to another port, e.g.: 5061 it works fine.

If you’re running on a Linux based system, you can do this:

/sbin/iptables -A PREROUTING -t nat -i eth1 -p udp --dport 5061 -j REDIRECT --to-port 5060

on the host to remap 5061 -> 5060 with no application change.

- Jared

> On Jan 26, 2015, at 4:26 PM, Brad Bendy <bb at 1stclasshosting.com> wrote:
> 
> Has anyone seen issues where a end user on uVerse trying to connect to
> either another provider or AT&T non uVerse (in this case DIA) is having SIP
> blocked? SIP leaving the uVerse network going to another uVerse DSL account
> is fine, but it appears soon as it leave the uVerse network all SIP traffic
> is blocked?
> 
> It appears others have seen this problem, some say it's a modem issue, some
> say they are truly blocking it. Ive yet to call uVerse support yet as im
> guessing ill get no where.
> 
> Thanks for any insight on this.
> 
> -- 
> This message contains confidential information and is intended only for the 
> individual named. If you are not the named addressee you should not 
> disseminate, distribute or copy this e-mail. Please notify the sender 
> immediately by e-mail if you have received this e-mail by mistake and 
> delete this e-mail from your system. E-mail transmission cannot be 
> guaranteed to be secure or error-free as information could be intercepted, 
> corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. 
> The sender therefore does not accept liability for any errors or omissions 
> in the contents of this message, which arise as a result of e-mail 
> transmission. If verification is required please request a hard-copy 
> version. 1st Class Hosting, LLC. 1712 Pioneer Ave, Suite 1854, Cheyenne, WY 
> 82001