Low cost WDM gear

Faisal Imtiaz faisal at snappytelecom.net
Sat Feb 7 20:40:26 UTC 2015


Mike,

Lighting up dark fiber is very similar to doing fixed wireless links (which you are familiar with).

There are different components involved in making a solutions work.... for each of the problems you have stated there is solution, and yes you have to calculate the loss and match power / optics to make it work.

FYI.. all CWDM/DWDM Muxes are passive ... :)
Active components (can be external or integrated).
If you want to do a direct run, from DC to DC using the Dark Fiber, you will need to have signal regeneration (or you may be able to get away with amps).

It is commonly expected for the transport provider to hand off the live circuit using standard SFP/SFP+, which means that they have to use a 'media converter' of some sorts to covert from Colorized Light to Standard 1330 or 880nm hand off.

If you want more info, hit me off list.

Regards.

Faisal Imtiaz
Snappy Internet & Telecom


----- Original Message -----
> From: "Mike Hammett" <nanog at ics-il.net>
> To: "NANOG" <nanog at nanog.org>
> Sent: Saturday, February 7, 2015 2:32:14 PM
> Subject: Re: Low cost WDM gear
> 
> Multiple 10G, yes. I'll reach out to the vendors mentioned to see how they
> line up, but it looks like I need to look into amps for the passive gear.
> There's 8 huts between the two ends, so no shortage of opportunities to
> amplify the signal. I'll know more about that when I get the amount of loss
> along the route.
> 
> Most people I know leasing circuits are doing so because dark isn't available
> or is otherwise ass expensive due to above shortage. The last quote I got
> for dark out of a useful facility was like $2M. 100+ miles was like $200k,
> the last 10 miles or whatever was the balance. Even $100k for gear (two
> sides and some amps) pales in comparison to $2k+ a month for the next 20
> years for a single channel.
> 
> 
> 
> 
> -----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
> 
> ----- Original Message -----
> 
> From: "Phil Bedard" <bedard.phil at gmail.com>
> To: "Mike Hammett" <nanog at ics-il.net>, "NANOG" <nanog at nanog.org>
> Sent: Saturday, February 7, 2015 1:17:48 PM
> Subject: Re: Low cost WDM gear
> 
> Is this for 10G? I'm kind of assuming 10G. What kind of equipment is
> being plugged into these? 300km is way beyond what you'll get with a
> passive solution, it's definitely in the "long-haul" terrtory. If you are
> launching out of a router the best pluggable optic you can generally get
> is rated at 80km, 10GBase-ZR, but even a passive mux at each end shaves
> some of that distance off.
> 
> 300km is going to require amplifiers at intervals across the span. Who is
> providing the fiber? I'd start talking to traditional transport vendors.
> Ekinops as mentioned is probably decent at a lower price, Adva works well
> and isn't all that expensive, even Cisco has gear reasonably priced. If
> you want to cover 300km on a fiber span though "cheap" isn't really a word
> I would describe. It's why people lease circuits. :)
> 
> Phil
> 
> 
> 
> On 2/7/15, 18:04, "Mike Hammett" <nanog at ics-il.net> wrote:
> 
> >One particular route I'm looking at is 185 miles, so of the options
> >presented 300 km is closest. ;-)
> > 
> > 
> > 
> > 
> >-----
> >Mike Hammett
> >Intelligent Computing Solutions
> >http://www.ics-il.com
> > 
> >----- Original Message -----
> > 
> >From: "Christopher Morrow" <morrowc.lists at gmail.com>
> >To: "Kenneth McRae" <kenneth.mcrae at me.com>
> >Cc: "NANOG" <nanog at nanog.org>
> >Sent: Saturday, February 7, 2015 12:02:11 PM
> >Subject: Re: Low cost WDM gear
> > 
> >would be good for mike to define 'long distances' here, is it:
> >2km
> >30km
> >300km
> >3000km
> > 
> >Probably the 30-60k range is what you mean by 'long distances' but...
> >clarity might help.
> > 
> >On Sat, Feb 7, 2015 at 12:55 PM, Kenneth McRae <kenneth.mcrae at me.com>
> >wrote:
> >> Mike,
> >> 
> >> I just replaced a bunch of FiberStore WDM passive muxes with OSI
> >>Hardware
> >> equipment. The FiberStore gear was a huge disappointment (excessive
> >>loss,
> >> poor technical support, refusal to issue refund without threatening
> >>legal
> >> action, etc.). I have had good results from the OSI equipment so far. I
> >> run passive muxes for CWDM (8 - 16 channels).
> >> 
> >> On Feb 07, 2015, at 09:51 AM, Manuel Marín <mmg at transtelco.net> wrote:
> >> 
> >> Hi Mike
> >> 
> >> I can recommend a couple of vendors that provide cost effective
> >>solutions.
> >> Ekinops & Packetlight.
> >> 
> >> On Saturday, February 7, 2015, Mike Hammett <nanog at ics-il.net> wrote:
> >> 
> >> I know there are various Asian vendors for low cost (less than $500)
> >>muxes
> >> to throw 16 or however many colors onto a strand. However, they don't
> >>work
> >> so well when you don't control the optics used on both sides (therefore
> >> must use standard wavelengths), obviously only do a handful of channels
> >>and
> >> have a distance limitation.
> >> What solutions are out there that don't cost an arm and a leg?
> >> -----
> >> Mike Hammett
> >> Intelligent Computing Solutions
> >> http://www.ics-il.com
> >> 
> >> 
> >> --
> >> TRANSTELCO| Manuel Marin | VP Engineering | US: *+1 915-217-2232* | MX:
> >>*+52
> >> 656-257-1109*
> >> 
> >> CONFIDENTIALITY NOTICE: This communication is intended only for the use
> >> of the individual or entity to which it is addressed and may contain
> >> information that is privileged, confidential, and exempt from
> >>disclosure
> >> under applicable law. If you are not the intended recipient of this
> >> information, you are notified that any use, dissemination,
> >>distribution, or
> >> copying of the communication is strictly prohibited.
> >> 
> >> AVISO DE CONFIDENCIALIDAD: Esta comunicación es sólo para el uso de la
> >> persona o entidad a la que se dirige y puede contener información
> >> privilegiada, confidencial y exenta de divulgación bajo la legislación
> >> aplicable. Si no es el destinatario de esta información, se le notifica
> >>que
> >> cualquier uso, difusión, distribución o copia de la comunicación está
> >> estrictamente prohibido.
> > 
> 
> 
>



More information about the NANOG mailing list