Low cost WDM gear

Justin Wilson - MTIN lists at mtin.net
Thu Apr 16 16:01:58 UTC 2015


Does anyone have a English speaking rep for FiberStore? I have a client with a difficult time ordering some custom stuff.  Language barrier is a big issue.



Justin Wilson j2sw at mtin.net
http://www.mtin.net  Managed Services – xISP Solutions – Data Centers
http://www.thebrotherswisp.com Podcast about xISP topics
http://www.midwest-ix.com Peering – Transit – Internet Exchange 

> On Feb 7, 2015, at 4:30 PM, Kenneth McRae <kenneth.mcrae at me.com> wrote:
> 
> I will live vicariously though your experiences with them.  I'm good on FiberStore.  :-)
> 
> Thanks for the feedback..
> 
> On Feb 07, 2015, at 01:27 PM, Faisal Imtiaz <faisal at snappytelecom.net> wrote:
> 
> Maybe, your experience was the pivotal event that became a turning point in their customer service attitudes... 
> 
> :)
> 
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232
> 
> Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net 
> From: "Kenneth McRae" <kenneth.mcrae at me.com>
> To: "Faisal Imtiaz" <faisal at snappytelecom.net>
> Cc: "Rodrigo 1telecom" <rodrigo at 1telecom.com.br>, "NANOG" <nanog at nanog.org>
> Sent: Saturday, February 7, 2015 4:24:18 PM
> Subject: Re: Low cost WDM gear
> 
> Point taken on the specs..  Still doesn't excuse poor customer service and tech support.  I never expect to be told that no refund will be issued when I am dissatisfied with the product.   A request for RMA because something is not working as expected should not have to be escalated to the President of the company. 
> 
> Other than that I am sure FiberStore is a great company :-)
> 
> On Feb 07, 2015, at 01:17 PM, Faisal Imtiaz <faisal at snappytelecom.net> wrote:
> 
> My point is......
>     ... The thing to rely on is/are the Specs.
>             If the Specs are right or specs are wrong, that is what determines the product's mfg shortcoming (defect).
> 
>     Mfg. Engineers are people, just like you and me.... and people can make mistakes... 
>     Being an Engineer, when I ask someone to do the design work, I ask them to explain it, and this way I double check their work.... Yes Mfg. Engineers are known to  F***up too.
> 
> While it is expected to be disappointed when something does not work.. and having a bad taste for dealing with that mfg, claiming that all of that mfg products are bad is a whole different issue.
> 
> I deal with FiberStore, my experience have been very different, when stuff purchased from them, did not meet the specs, they took it back no questions asked.
> 
> Regards. 
> 
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232
> 
> Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net 
> From: "Kenneth McRae" <kenneth.mcrae at me.com>
> To: "Faisal Imtiaz" <faisal at snappytelecom.net>
> Cc: "Rodrigo 1telecom" <rodrigo at 1telecom.com.br>, "NANOG" <nanog at nanog.org>
> Sent: Saturday, February 7, 2015 4:01:29 PM
> Subject: Re: Low cost WDM gear
> 
> That's true up to a point.  Specs are only as good as the entity providing the data.  I can tell you a few stories about specs and some MAJOR fails by a major network equipment manufacturer failing to meet advertised specs.  When you engage the engineering folks to assist in a build, they should know the true specs of their gear better than anyone else.  If they say for a certain distance that A+B will work, then that is exactly what I expect.
> 
> That is pretty basic.
> 
> On Feb 07, 2015, at 12:56 PM, Faisal Imtiaz <faisal at snappytelecom.net> wrote:
> 
> More power to you .... 
> 
> I always get a chuckle out of statements such as ... "Compared FiberStore to another Vendor"...  
> 
> It was pointed out to me long time ago.... when someone said.. "My Chevy is better than a Ford"....
> Someone pointed out, hey, which Chevy ?  the Chevette ? or the Corvette ? and Which Ford the Fiesta or Mustang ?
> 
> 
> Every mfg. has a lots and lots of products, and they are always getting improved...
> 
> One has to pay attention to the specs.. even the same model products at different times don't have the same specs !
> 
> :)
> 
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232
> 
> Help-desk: (305)663-5518 Option 2 or Email: Support at Snappytelecom.net 
> From: "Kenneth McRae" <kenneth.mcrae at me.com>
> To: "Faisal Imtiaz" <faisal at snappytelecom.net>
> Cc: "Rodrigo 1telecom" <rodrigo at 1telecom.com.br>, "NANOG" <nanog at nanog.org>
> Sent: Saturday, February 7, 2015 3:49:16 PM
> Subject: Re: Low cost WDM gear
> 
> That's why I engage the engineering resources on their end to make sure the chosen candidate will support the use case.  I have now performed an A/B comparison and the FiberStore gear is inferior.  Excessive loss on the mux and optics. 
> 
> On Feb 07, 2015, at 12:44 PM, Faisal Imtiaz <faisal at snappytelecom.net> wrote:
> 
> If you pay close attention to the Spec Sheets, on power output, insertion loss, sensitivity, and do the proper calculation for your link, then using anyone's products, passive or active will work unless the devices do not meet specified specs.
> 
> If you don't do your homework, cals on the design, loss, and just buy stuff based on whatever, then it does not matter who the mfg. is, you are very very likely to be surprised in a bad way.
> 
> :)
> 
> Faisal Imtiaz
> Snappy Internet & Telecom
> 
> ----- Original Message -----
> From: "Rodrigo 1telecom" <rodrigo at 1telecom.com.br>
> To: "Kenneth McRae" <kenneth.mcrae at me.com>
> Cc: "NANOG" <nanog at nanog.org>
> Sent: Saturday, February 7, 2015 3:24:43 PM
> Subject: Re: Low cost WDM gear
> What others vendors do you using? Here in Brazil only PADTEC have this
> passive solution... Some days ago Digitel contact me to show your multiplex
> solution... Is a active solution...
> We import this from fiberstore, but i don't know others vendors to buy 10G
> sfp+ cwdm and this mux/demux...
> Enviado via iPhone 
> Grupo Connectoway
>> Em 07/02/2015, às 16:04, Kenneth McRae <kenneth.mcrae at me.com> escreveu:
>> 
>> Hi Enviado,
>> 
>> I cannot recommend FiberStore as I had a bad experience with them. I
>> needed to cover only 3km from A to B side. When using 10km optics, I saw
>> a loss of over 5db with their passive mux inserted into the path which
>> created a total loss of over -20db which is outside of the tolerances for
>> our equipment with 10km SFP+. Using another vendors low insertion loss
>> mux corrected our issue. I am sure if you are using an 80km optic, you
>> may be able to tolerate a higher insertion loss to cover < 60km. I also
>> notice that their CDWM optics averaged about 3db less in power output when
>> compared to other vendors.
>> 
>> Thanks
>> 
>> Kenneth
>> 
>>> On Feb 07, 2015, at 10:33 AM, Rodrigo 1telecom <rodrigo at 1telecom.com.br>
>>> wrote:
>>> 
>> 
>>> Hi kenneth... which the distance do you have from side A to side B when
>>> you using passive solutions from fiberstore( mux and demux)?
>>> I buy this mux and demux(4 channels single fiber) and only make a test
>>> about 60km( mux side A and demux on side B) with sfp+10gb for 80km... (
>>> only see ddm on my ex3300( about -19db for 60km). Test switch access with
>>> ssh and pinging tests...
>>> What kind os issue do you have? For distances less than 60km is this
>>> solution good?
>>> Thanks!!!
>>> 
>>> Enviado via iPhone 
>>> Grupo Connectoway
>>> 
>>>> Em 07/02/2015, às 14:55, Kenneth McRae <kenneth.mcrae at me.com> escreveu:
>>>> Mike,
>>>> I just replaced a bunch of FiberStore WDM passive muxes with OSI Hardware
>>>> equipment. The FiberStore gear was a huge disappointment (excessive
>>>> loss, poor technical support, refusal to issue refund without
>>>> threatening legal action, etc.). I have had good results from the OSI
>>>> equipment so far. I run passive muxes for CWDM (8 - 16 channels).
>>>> On Feb 07, 2015, at 09:51 AM, Manuel Marín <mmg at transtelco.net> wrote:
>>>> Hi Mike
>>>> I can recommend a couple of vendors that provide cost effective
>>>> solutions.
>>>> Ekinops & Packetlight.
>>>> On Saturday, February 7, 2015, Mike Hammett <nanog at ics-il.net> wrote:
>>>> I know there are various Asian vendors for low cost (less than $500)
>>>> muxes
>>>> to throw 16 or however many colors onto a strand. However, they don't
>>>> work
>>>> so well when you don't control the optics used on both sides (therefore
>>>> must use standard wavelengths), obviously only do a handful of channels
>>>> and
>>>> have a distance limitation.
>>>> What solutions are out there that don't cost an arm and a leg?
>>>> -----
>>>> Mike Hammett
>>>> Intelligent Computing Solutions
>>>> http://www.ics-il.com
>>>> --
>>>> TRANSTELCO| Manuel Marin | VP Engineering | US: *+1 915-217-2232* | MX:
>>>> *+52
>>>> 656-257-1109*
>>>> CONFIDENTIALITY NOTICE: This communication is intended only for the use
>>>> of the individual or entity to which it is addressed and may contain
>>>> information that is privileged, confidential, and exempt from disclosure
>>>> under applicable law. If you are not the intended recipient of this
>>>> information, you are notified that any use, dissemination, distribution,
>>>> or
>>>> copying of the communication is strictly prohibited.
>>>> AVISO DE CONFIDENCIALIDAD: Esta comunicación es sólo para el uso de la
>>>> persona o entidad a la que se dirige y puede contener información
>>>> privilegiada, confidencial y exenta de divulgación bajo la legislación
>>>> aplicable. Si no es el destinatario de esta información, se le notifica
>>>> que
>>>> cualquier uso, difusión, distribución o copia de la comunicación está
>>>> estrictamente prohibido.
> 
> 
> 
> 




More information about the NANOG mailing list