RADB

Wed Oct 8 23:15:54 UTC 2014

You can also verify the object configurations from another IRRd, such
as Level(3)

whois -h filtergen.level3.net "RADB::YOUR-AS-SET
-searchpath=RIPE;ARIN;RADB -recurseok -warnonly"

You can limit the searchpath to just include RADB if you wish, but
it's good to know what else is out there.

charles

On Wed, Oct 8, 2014 at 4:44 PM, Brandon Wade <brandonwade at yahoo.com> wrote:
> Hi,
>
> I really don't know where else to post this. I recently subscribed to RADB and added route objects and route6 objects for our prefixes we announce. Of course an aut-num object was created and I created a list of ASN's that are downstream customers in an as-set list. But, since this is my first time ever subscribing to a routing registry, I really don't know for sure that I'm doing everything correctly. So, I submitted an e-mail to RADB and requested that they review what I've done and to see if I'm doing it correctly. Well, the reply I received was far less than I could have ever imagined:
>
> "RADb is a self-serve service. If you have specific questions, we can
> address those. However, the type of audit requested is not a part of the standard offering associated with this service."
>
> So my question is, how am I supposed to verify that what I've done is what is supposed to be done and that I am doing this correctly?
>
> My next question is, why would RADB offer zero support for confirming this? And lastly, why should my organization pay $500 per year to a service that is unwilling to assist in making sure their subscriber is using their service properly?
>
> Best regards,
> Brandon Wade