Carrier-grade DDoS Attack mitigation appliance

James Braunegg james.braunegg at
Wed Dec 10 13:08:28 UTC 2014

Dear All

We use a combination of NSFOCUS hardware (ADS, ADS-m and NTA along with A10 Hardware)

All of which I highly recommend !

Kindest Regards

James Braunegg
P:  1300 769 972  |  M:  0488 997 207 |  D:  (03) 9751 7616
E:   james.braunegg at<mailto:james.braunegg at>  |  ABN:  12 109 977 666
W:<>   T: @micron21

[Description: Description: Description: Description: M21.jpg]
This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer.

-----Original Message-----
From: NANOG [mailto:nanog-bounces at] On Behalf Of Parrish, Luke
Sent: Wednesday, December 10, 2014 8:08 AM
To: J. Tozo
Cc: nanog
Subject: RE: Carrier-grade DDoS Attack mitigation appliance

Switch to Nemo.

-----Original Message-----

From: NANOG [mailto:nanog-bounces at] On Behalf Of J. Tozo

Sent: Monday, December 08, 2014 3:26 PM

Cc: nanog

Subject: Re: Carrier-grade DDoS Attack mitigation appliance

We also evaluating another appliance to put in place of Arbor, their "support" outside USA its a joke.

On Mon, Dec 8, 2014 at 6:17 PM, Ammar Zuberi <ammar at> wrote:

> Hi,


> We're currently running the Arbor Peakflow SP with the TMS and it

> works very well for us.


> Best Regards,


> Ammar Zuberi

> FastReturn, Inc





> Direct Line: +971 50 394 7299

> Email: ammar at


> This email and any files transmitted with it are confidential and

> intended solely for the use of the individual or entity to whom they are addressed.

> If you have received it by mistake, please let us know by e-mail reply

> and delete it from your system; you may not copy this message or

> disclose its contents to anyone. Please note that any views or

> opinions presented in this email are solely those of the author and do

> not necessarily represent those of the company. Finally, the recipient

> should check this email and any attachments for the presence of

> viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.


> > On Dec 8, 2014, at 10:53 PM, Tony McKay

> <Tony.McKay at> wrote:

> >

> > Does anyone on list currently use Peakflow SP from Arbor with TMS,

> > and

> is it truly a carrier grade DDoS detection and mitigation platform?

> Anyone have any experience with Plixir?

> >

> > Tony McKay

> > Dir. Of Network Operations

> > Office:  870.336.3449

> > Mobile:  870.243.0058

> > -The boundary to your comfort zone fades a little each time you

> > cross

> it.  Raise your limits by pushing them.

> >

> > This electronic mail transmission may contain confidential or

> > privileged

> information. If you believe that you have received this message in

> error, please notify the sender by reply transmission and delete the

> message without copying or disclosing it.

> >

> >

> >

> > -----Original Message-----

> > From: NANOG [mailto:nanog-bounces at] On Behalf Of Mohamed

> > Kamal

> > Sent: Sunday, December 07, 2014 2:10 PM

> > To: nanog

> > Subject: Carrier-grade DDoS Attack mitigation appliance

> >

> >

> > Have anyone tried any DDoS attack mitigation appliance rather than

> > Arbor

> PeakFlow TMS? I need it to be carrier-grade in terms of capacity and

> redundancy, and as far as I know, Arbor is the only product in the

> market which offers a "clean pipe" volume of traffic, so if the DDoS

> attack volume is, for example, 1Tbps, they will grant you for example

> 50Gbps of clean traffic.

> >

> > Anyway, I'm open to other suggestions, and open-source products that

> > can

> do the same purpose, we have network development team that can work on this.

> >

> > Thanks.

> >

> > --

> > Mohamed Kamal

> > Core Network Sr. Engineer

> >







The information transmitted is intended only for the person or entity to which it is addressed and may contain proprietary, confidential and/or legally privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers.


More information about the NANOG mailing list