Looking for Netflow analysis package
nanog at data102.com
Wed May 15 02:32:25 UTC 2013
We use/d nfsen extensively for this this past November & December and have
been very successful in planning our bandwidth purchases since then. We
like it so much that reliable, full-speed Netflow telemetry is now a
requirement on all edge/core routers.
On Tue, May 14, 2013 at 8:18 PM, Jason Lester <jlester at wcs.k12.va.us> wrote:
> ManageEngine's NetFlow Analyzer will do most of that (not sure about AS
> Path Analysis.) It is priced per monitored interface, but is pretty
> reasonable for what it does. They have a 30-day demo available. We use
> their full OpManager+NetFlow suite to monitor several hundred devices with
> thousands of interfaces. We only license NetFlow for the interfaces that
> connect to external providers.
> E-mail me privately if you want to see the reports.
> On Tue, May 14, 2013 at 6:59 PM, Erik Sundberg <ESundberg at nitelusa.com
> > Does anyone know of a netflow collector that will do the following.
> > *Graph/List Destination Networks By Top AS
> > *Graph/List Destination Networks By Top IP Address
> > *AS Path Analysis
> > *Traffic Type (ICMP, TCP, UDP, IPSEC, HTTP, SSH, SMTP, etc..)
> > We will be using this to help us decide who to Peer with and what transit
> > Providers to look at.
> > I am familiar with Arbor Network's Peak Flow utility but it's a little
> > pricy.
> > I also found AS-Stats https://neon1.net/as-stats/ look promising from
> > power point on their page.
> > Thanks
> > Erik
> > ________________________________
> > CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents,
> > or previous e-mail messages attached to it may contain confidential
> > information that is legally privileged. If you are not the intended
> > recipient, or a person responsible for delivering it to the intended
> > recipient, you are hereby notified that any disclosure, copying,
> > distribution or use of any of the information contained in or attached to
> > this transmission is STRICTLY PROHIBITED. If you have received this
> > transmission in error please notify the sender immediately by replying to
> > this e-mail. You must destroy the original transmission and its
> > without reading or saving in any manner. Thank you.
More information about the NANOG