Network Vendor suggestions/reviews, Arista Networks, Dell Force10, Juniper, Extreme Networks etc...
Phil Fagan
philfagan at gmail.com
Wed Jun 19 00:08:27 UTC 2013
I love JUNOS, don't really care for IOS. I really trust Cisco and Juniper's
hardware, with that being said Arista is your best bet for cheapest port.
I've only seen Arista in lab, not in the wild yet so I can't speak for how
I would trust them. You mention getting bit by single sups, I believe as of
late Arista has had issue with OSPF failover time between dual-sups in HA
setups.
I used to have a Dell laptop....but I'm sure their great too. In the end
for me I only trust Cisco or Juniper. I've been burnt by Foundry and am
waiting to on Arista.
On Tue, Jun 18, 2013 at 5:53 PM, Blake Pfankuch - Mailing List <
blake.mailinglist at pfankuch.me> wrote:
> Howdy,
> I have been working on a proposal for the organization I
> work for to move into the 10gbit datacenter. We have a small datacenter
> currently of about 1000 ports of 1gbit. We have traditionally been a full
> Cisco shop, however I was asked to do a price comparison as well as
> features with other major alternative vendors. I was also asked to do some
> digging as far as what "the real world" thinks about these possible vendors.
>
> We currently have 2 Cisco 6509's with 8 48 port cards Sup 3BXL, 2 Cisco
> 4506 with 5x 48 port card and Sup V's and 2 4900M switches providing 10gbit
> to a very specialized implementation. With all of our technology, we try
> to not be bleeding edge, but oozing edge. We need 5 9's or more of uptime
> yearly so stability is preferable to cool features. We currently have
> single supervisors in all of our switches (not my decision) and it has bit
> us recently. Everything we are looking at needs to support NSF/SSO/VSS of
> some kind.
>
> What we have been looking to replace it with in Cisco world is Nexus 7004
> Core and Nexus 5596UP with 2200 series Fabric extenders for Dist/Access as
> well as 2200 Fabric Extenders within our Dell Blade Chassis. Realistically
> we will be under 800 ports of 10gbit (excluding Blades) which puts us in a
> tough spot from what I can find. Currently everything we have is EOR,
> however TOR would make more sense allowing us to switch to SFP+ twinax
> connectivity to servers.
>
> With this in mind, I have a few questions...
>
> It was mandated that I look at a company "Arista Networks" and investigate
> possible options. I had not heard much about them, so I look to the
> experts. Pro's and Con's? Real world experience? Looks to me they have a
> lot of cool features, but I'm slightly concerned with how new they might
> be, how reliable it would be as well as their QA/bugfix history. Also 24x4
> support and hardware replacement. Everything in our datacenter currently
> has a 2 or 4 hour cisco contract on it and critical core components have a
> cold spare in inventory.
>
> Dell Force 10... I know Dell tries to get you to drink the Koolaid on this
> solution, I was a former Dell Partner and they even pushed me to get demo
> equipment going... What's the experience with their chassis switches?
> Stability? Configuration sanity? What do people like? What do people
> hate?
>
> Juniper. What do people like? What do people hate? Have the Layer 2
> issues of historical age gone away? Is the config still xml ish? It has
> been about 5 years since I worked with anything Juniper.
>
> Extreme networks. I know very little about them historically. What is
> good, what is bad? Is the config sane?
>
> I would be happy to compile any information I find, as well as our
> sanitized internal conclusions. On and off list responses welcome.
>
> If there is another vendor anyone would suggest, please add them to the
> list with similarly asked questions.
>
> Thanks!
>
> Blake
>
--
Phil Fagan
Denver, CO
970-480-7618
More information about the NANOG
mailing list