Ciena 6200 clue?

Wed Jul 3 22:14:19 UTC 2013

On 7/3/13 5:41 PM, Phil Bedard wrote:
> The ALU 7750/7450, etc. routers have a separate routing
> process/configuration for their OOB mgmt and as of the last time I looked
> do not support a default gateway.

Well you can set up multiple static routes.  The only route you can't set it 0/0.

This will work, though I'd suggest only putting the management routes it needs
in it.

A:Milhouse>bof# static-route 0.0.0.0/0 next-hop 1.0.0.2
MINOR: SYSTEM #1505 Invalid static route destination prefix - cannot configure
default route on the management interface

A:Milhouse>bof# static-route 0.0.0.0/1 next-hop 1.0.0.2
*A:Milhouse>bof# static-route 128.0.0.0/1 next-hop 1.0.0.2
*A:Milhouse>bof# show bof
===============================================================================
BOF (Memory)
===============================================================================
    primary-image    nope.jpg
    primary-config   Milhouse/config.cfg
    address          1.0.0.70/24 active
    primary-dns      1.0.0.2
    dns-domain       nope.jpg
    static-route     0.0.0.0/1 next-hop 1.0.0.2
    static-route     128.0.0.0/1 next-hop 1.0.0.2
    autonegotiate
    duplex           full
    speed            100
    wait             4
    persist          on
    no li-local-save
    no li-separate
    console-speed    115200
===============================================================================

-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net