BGP from Juniper to Cisco ASR
raaki.88 at gmail.com
Thu Dec 19 03:01:34 UTC 2013
Whats the frequency of this message occurence ?
On Thu, Dec 19, 2013 at 6:31 AM, Eric A Louie <elouie at yahoo.com> wrote:
> When I had that problem, it was because the max-prefixes on the Juniper
> router was being triggered. If I remember correctly. It's a strange
> return message for the wrong issue.
> > From: Philip Lavine <source_route at yahoo.com>
> >To: NANOG list <nanog at nanog.org>
> >Sent: Wednesday, December 18, 2013 7:48 AM
> >Subject: BGP from Juniper to Cisco ASR
> >Dec 18 07:46:33: %BGP-3-NOTIFICATION: received from neighbor <REMOTE
> PEER> active 2/5 (authentication failure) 0 bytes
> >Dec 18 15:46:33.615: BGP: ses global <REMOTE PEER> (0x7FB1CD209CF0:0) act
> Receive NOTIFICATION 2/5 (authentication failure) 0 bytes
> >Although I have seem this on the message boards I am little confused in
> that the ISP is telling me that there is no authentication enabled on the
> Juniper and I do not have authentication enabled on the ASR. So what is
> going on here?
More information about the NANOG