Cisco CAT6500 IOS Simulator
Carlos Asensio
CAsensio at nexica.com
Thu Feb 23 09:00:04 UTC 2012
Hi Hammer,
Thanks for your answer. That was pretty much what I was thinking.
Thanks to all the offers I've received off-line :).
Best regards,
Carlos.
-----Mensaje original-----
De: -Hammer- [mailto:bhmccie at gmail.com]
Enviado el: miércoles, 22 de febrero de 2012 16:56
Para: nanog at nanog.org
Asunto: Re: Cisco CAT6500 IOS Simulator
NO.
There is no method. Go to Ebay and buy one. Sorry. Or if you are a big
enough customer you can ask Cisco to mock up your solution in one of
their labs.
-Hammer-
"I was a normal American nerd"
-Jack Herer
On 2/22/2012 9:48 AM, Hank Nussbacher wrote:
> On Wed, 22 Feb 2012, Carlos Asensio wrote:
>
> Not supported:
> http://www.gns3.net/hardware-emulated/
>
> -Hank
>
>> Hi John,
>>
>> Thanks for your answer but, as far as I know, with GNS3 we can't run
>> a CAT6500 IOS.
>>
>> Any alternative?
>>
>> Cheers,
>> Carlos.
>>
>>
>> -----Mensaje original-----
>> De: John Kreno [mailto:john.kreno at gmail.com]
>> Enviado el: miércoles, 22 de febrero de 2012 15:25
>> Para: Carlos Asensio
>> Asunto: Re: Cisco CAT6500 IOS Simulator
>>
>> Try GNS 3
>>
>>
>> On Wed, Feb 22, 2012 at 6:53 AM, Carlos Asensio <CAsensio at nexica.com>
>> wrote:
>>> Hi there,
>>>
>>> Anyone know a way of simulate a Cisco CAT6500 IOS?
>>>
>>> We're trying to deploy a lab of our production environment.
>>>
>>> Thanks in advance,
>>> Carlos.
>>
>>
>>
>>
More information about the NANOG
mailing list