10G switchrecommendaton

Thu Feb 9 21:47:19 UTC 2012

hi George,

IGMPv3 snooping has been supported since EOS 4.7.  Its enabled by default
in EOS 4.8.x.

In terms of specifics, there is support for both IGMPv3 snooping & IGMPv3
querier. There isn't currently support for IGMPv3 snooping querier.

cheers,

lincoln.

On Fri, Feb 10, 2012 at 8:17 AM, George Bonser <gbonser at seven.com> wrote:

>  Feb  9 07:42:21 SJC-AGS-01 IgmpSnooping:
> %IGMPSNOOPING-4-IGMPV3_UNSUPPORTED: IGMPv3 querier detected on interface
> Port-Channel1 (message repeated 34 times in 625.028 secs)****
>
> ** **
>
> SJC-AGS-01#sho ver****
>
> Arista DCS-7124S-F****
>
> Hardware version:    06.02****
>
> Serial number:       JSH10130054****
>
> System MAC address:  001c.7308.752f****
>
> ** **
>
> Software image version: 4.6.4****
>
> Architecture:           i386****
>
> Internal build version: 4.6.4-434606.EOS464****
>
> ** **
>
> Sure, we can discuss it.****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* lincoln dale [mailto:ltd at interlink.com.au]
> *Sent:* Thursday, February 09, 2012 1:13 PM
> *To:* George Bonser
> *Cc:* Leigh Porter; nanog list
> *Subject:* Re: 10G switchrecommendaton****
>
> ** **
>
> On Fri, Feb 10, 2012 at 7:24 AM, George Bonser <gbonser at seven.com> wrote:
> ****
>
> It's pretty good gear.  The only problem I've had with it is the
> limitation of IGMP not working on mLAG VLANs.****
>
>
> IGMP should work just fine with MLAG.  IGMP state is sync'd between the
> MLAG pair. Happy to talk about this more off-list if you wish.
>
>
> cheers,
>
> lincoln.
> (ltd at aristanetworks.com)****
>