Any Idea About Spectrum-DMR-104-1 ?!
Owen DeLong
owen at delong.com
Thu Aug 16 20:10:42 UTC 2012
On Aug 16, 2012, at 12:39 , Leo Bicknell <bicknell at ufp.org> wrote:
> In a message written on Thu, Aug 16, 2012 at 11:30:40PM +0430, Shahab Vahabzadeh wrote:
>> Dear Owen,
>> Thanks for your reply, in reply to your factors:
>>
>> 1. 1~2 Kilometers
>> 2. PTP
>> 3. Directional
>> 4. 29db Dish (single or dual)
>
> I know someone already pointed you to the product, but that just
> screams like what you want is the Ubiquity airFiber product. You
> should easily get near the max 1.4Gbps throughput at 1-2km if you
> have clear line of site. It's "plug and play", in that you should
> have to do very mimimal tuning to get that performance. Mostly
> making sure the two units are aligned properly.
>
> I've not gotten a quote myself, but the Internet forums suggest the
> gear is $3k for a single link (so two units). Just to do high quality
> 801.11n with dish antennas would probably cost $1k or more.
>
> The 24Ghz band they use should be worldwide license free (check with
> your country) and also have less interference than the 5Ghz band.
>
+1 for ubiquity. I've had excellent results with their products though
I have not used the Air Fiber product specifically and haven't
tested any of the long-haul 1Gbps products.
Owen
More information about the NANOG
mailing list